Palsonic 8040PFST owner manual TV Video 1 Video 2 Video, To connect Monitor output terminals

To select the input press the AV button on the remote controller repeatedly until you see the corresponding input indication on the screen. To return to aerial input, press the AV button until

it displays programme number, or press direct channel select button or the CH button.

TV VIDEO 1 VIDEO 2 VIDEO 3

If the colour of video input is abnormal, the colour system setting may be incorrect. Press the SYS button to display COLOR AUTO If not, press the or button until normal colour appears

Note on the S-VIDEO terminal

The S-VIDEOinput terminal has priority over the AV1, AV2 VIDEO terminals on the rear and the AV3 VIDEO terminals on the left side. To use equipment connected to the video terminals, disconnect any plug from the S-VIDEOterminal

2. To connect MONITOR output terminals

You can connect a stereo system to the MONITOR output terminals (photo type) on the set to enjoy a high - quality sound from the stereo system. The MONITOR output terminals output the video and audio signals being displayed on the screen.

18