Presetting programs, Auto Search, Manual Search

Operations

Presetting programs

Firstly, use the Auto search function to preset all active channels in your area automatically. Then arrange the preset channels with the manual search and program edit functions.

Auto Search

Press the MENU button to select PRESET menu.

Press CH+/- to select AUTO SEARCH.

Press VOL+/- and the TV set starts Auto channel preset. All active channels will be preset and stored into the memory automatically. After presetting, the TV will display the first channel.

During the process of Auto channel preset, pressing the MENU button will stop the process.

Note: Before you start Auto Search, we recommend you to set a proper Sound system and Colour system according to your local area.




PROGRAM		008
TYPE		USER2
BAND		V-H
SKIP		OFF
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
		ADJ

	SEL

Manual Search

If desired channel can not be preset by Auto search or if you would like to preset channels to specific position numbers one by one, use manual search function.

Access the PRESET menu, then select PROGRAM item by CH+/- and set the desired channel number (from 0~199) by VOL+/- or Digit buttons.

Press CH+/- to select MANUAL SEARCH item. Press VOL+ button, the set searches towards higher frequency. Press VOL- button, the set searches towards lower frequency. The search stops when a program is found and this program will be stored in the specified position number.




PROGRAM		008
TYPE		USER2
BAND		V-H
SKIP		OFF
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
		ADJ

	SEL

You can use band selection to quicken search process. Select BAND item and press VOL+/- buttons. The band switches among V-L, V-H and UHF. Then select MANUAL SEARCH item and press VOL+/- buttons to start manual search.

Repeat the above steps if you want to store another program in other position number.




PROGRAM		008
TYPE		USER2
BAND		V-H
SKIP		OFF
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
		ADJ

	SEL