Turning On/Off
MENU VOL - VOL + | CH - CH + SOURCE |
|
|
|
|
Turning On
1.Insert the outlet plug of the AC power adaptor into the DC power input of the unit.
2.Press the power switch and the red indicator lights up, the TV/MONITOR is in STANDBY mode.
3.Press the SOURCE button on the unit's control panel
or the button on the remote control, the red indicator turns yellow and the set is turned on.
Notes:
In TV mode, when there is no TV signal input for about 15 minutes, the set goes to STANDBY automatically. (The Blue Background item should be set to Enable).
Turning Off
1.If you want to turn off the power completely, press the power switch.
2. If you want to turn off temporarily, press the button on the remote control, the set goes to STANDBY and the indicator turns red.
Notes:
This TV set can automatically turn off by:
1.When there is no TV signal input for about 15 minutes;
2.Sleep timer;
3.Off timer.
Selecting input signal
1.Press the AV button on the remote control or SOURCE button on the control panel to select input mode. You can select TV, AV,
2.If you want to go to TV mode, press AV button repeatedly until TV picture displays. You can also press 0~9 digit buttons, CH+ or CH- button to go to TV mode.
3.Press OSD button, the screen displays current mode. Press again to cancel OSD.
14