Palsonic TFTV-201 owner manual Channel Memory PAL System, Storing the Channels Automatically

Channel Memory (PAL System)

Storing the Channels Automatically

You can scan the frequency ranges available on your television in your country and store all the channels found automatically. The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not correspond to those by which you wish to identify the channels.

If this is the case, you can then sort them manually.

1

2

Press the MENU button.

Result: The PICTURE menu is displayed.

Press the VOL button to place the selection bar on the FUNCTION menu.

3	Press the CH button to place the selection bar
	on the TUNING mode.
	And press the SEL button.
4	Press the CH button to place the selection bar
	on the AUTO TUNING and press the SEL button.
5	Press the CH button, set the broadcasting system.
	(PAL/ SECAM or SECAM L) and press SEL button.
	Result: The AUTO TUNING will store found
	channel automatically. White the
	AUTO TUNING is progressing,
	the TV will change channels up to 99.
	When searching and storing is
	completed, the SORT menu is displayed.
	User can exchange favourite channels to
	preferred channel number.
6	Press the VOL	or VOL	button until favourite
	channel is shown.
7	Press the CH button to place the selection bar
	on the TO option. Press the VOL or VOL
	until the new number by which you wish to
	identify the channel is displayed.
8	Press the CH button to place the selection bar on the store.
	Press the VOL	or VOL	button, the channel will stored in
	memory displaying OK for a moment.
9	When searching and storing is complete, press
	the MENU button repeatedly until the menus

disappear.

21