Remote Control
Preparation of Remote Control
Refer to the drawing and remove the empty battery receptacle.
Insert the battery into the receptacle. Make sure the polarity matches the marks inside the component.
Using of Remote Control
Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit.
Insert the receptacle into the remote control.
•Under normal use the battery will last for six months.
•Take out battery when the remote is not in use for a long time.
•The operating distance may vary depending to the brightness around.
Notes:
•Do not point bright lights directly at the remote control sensor.
•Do not place objects between the remote control unit and the remote control sensor.
•Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment.
8