Palsonic TFTV1920D user manual Troubleshooting, Symptom Check Item

Troubleshooting

SYMPTOM	CHECK ITEM
	Make sure disc tray is closed
	Make sure disc is loaded in.
The player cannot play.	Make sure disc is loaded correctly.
	Make sure disc is not dirty or warped.
	Make sure the player’s region code is the same as region code
	of DVD disc.
	Make sure water condensation has not occurred.
	Take out disc and leave the player on for at least one hour
	when water condensation occurs.
	Make sure system connection is correct.
	Make sure the power of speakers is turned on.
There is no sound.	Make sure the sound setup of DVD disc is correct.
	Make sure disc is not dirty or warped.
	Clean or replace the disc.
There is no picture or the picture	Make sure the unit is turned on and is in correct video mode.
moves up and down Unsteady.	Make sure system connections are correct. If it is not, access
	the setup menu and select the correct system.
Cannot continue to play and	Make sure it is not in A-B repeat status.
	Press A-B button to cancel it.
play a section repeatedly.
	Make sure disc is not dirty or damaged.
	Clean the disc or skip selection.
	Make sure there are no obstructions between the remote
The remote control does not	control and the player.
	Make sure the remote control is pointing at the player.
work.
	Make sure batteries are inserted and the polarity is correct.
	Make sure battery is not weak.
	Replace the weak battery.

Other Notes:

Static or other external interference may cause the player to behave abnormally. In this occurrence, unplug the power-supply cord from the outlet and plug it in again to reset the player. If the problems persist, then please disconnect the power and consult a qualified technician.

36