Palsonic TFTV-510 owner manual Connecting the PC input terminals

1.Carefully check the terminals for position and type before making any connections.

2.Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals.

3.When connecting an external device, turn off the power of the main unit first to prevent any possible damage.

To S-VIDEO input	To S-VIDEO output
w	w
R	R
To audio inputs	To audio outputs

VCR, DVD etc.

W White (audio, L)

R Red (audio, R)

AUDIO IN PHONE SPEAK OUT TUNER POWER IN

Connecting the PC input terminals

Connect the D-sub signal terminal on the TV to the output of PC equipment through Min D-sub 15 pin cable as illustrated. Connect a cable, which matches the audio output terminal on the computer. If you select PC signal, please set the input signal source to PC mode (please refer to page 13).

To VGA input To VGA output

To audio input To audio output

Equipment with

VGA output

Notes:

1. The display native resolution is 640 x 480. If the signal resolution exceed the native resolution, it may not be possible to show fine detail with sufficient clarity.

2. We recommend that you do not set the vertical scanning frequency for PC signals to exceed 60Hz otherwise it maybe display incorrectly.

12