Palsonic TFTV810 Setting Picture, Using the Preset Picture Mode, Customising the Picture

Setting Picture

Using the Preset Picture Mode

1	Press MENU to display the menu main page.	Video	Audio Screen Program Option
	The [Video] menu page will be highlighted automatically.

2

3

4

5

Press CH to select Mode item.		1.	Mode:	Standard
		2. Contrast			50
Press VOL+ or ENTER to access the sub-menu.		3.	Brightness		50
		4. Colour			50
		5.	Hue		00
Press CH	to select a desired picture mode.	6.	Sharpness		50
		7. DNR			Auto

Press ENTER to confirm and press MENU repeatedly to exit.

There are three preset picture modes [Vivid, Standard and Mild] and one user-set picture mode [Custom]. Each preset mode has its own picture settings.

[Vivid]: Select for a bright picture.

[Standard]: Select for a normal picture.

[Mild]: Select for a fine/soft picture.

You may directly use the P.M button on the remote control to select a desired picture mode.

Customising the Picture

1	Press MENU to display the menu main page.
	The [Video] menu page will be selected automatically.
2	Press CH to enter the menu and select item with CH or CH .

3 Press VOL+/- to adjust the value of the item. 4 Press MENU to exit.

Video		Audio	Screen Program Option
1. Mode:				Custom
2.	Contrast		40
3.	Brightness				60
4.	Colour				50
5.	Hue				00
6.	Sharpness				50
7. DNR					Auto

	Adjustment item		Press VOL-	Value range			Press VOL+
	Contrast		Decrease contrast	0 - 100		Increase contrast
	Brightness		Less bright	0 - 100		More bright
	Colour		Lower colour intensity	0 -100		Higher colour intensity
	Hue *		Towards purple	-50 - +50		Towards green
	Sharpness		Soft picture	0 - 100		Sharp picture
	* The [Hue] item is for NTSC only
Reducing Picture Noise
					Video Audio Screen Program Option
1	Press MENU to display the menu main page.
	The [Video] menu page will be selected automatically.
					1. Mode:			Custom
2 Press CH
		repeatedly to select the DNR item.			2. Contrast				40
					3. Brightness				60
3 Press VOL+ or ENTER to access the sub-menu.					4. Colour				50
					5. Hue				00
4 Press CH		to select.			6. Sharpness				50
					7. DNR				Auto
5	Press ENTER to confirm and press MENU repeatedly to exit.
	Sometimes a noisy picture may appear on the screen because of poor signal. This function helps

to enhance the picture quality by reducing the noise.

Freezing picture

Press the FREEZE button to hold on the image on the screen (the video sources still run). Press again to reactivate the image.

Note:

For the sake of protecting the screen, please do NOT freeze a picture for a long time.

19