Memorising the Channels
Your PDP TV can memorise and store all the available channels. After the available channels are memorised, use CH+/- to scan the channels.
Storing Channels in Memory Automatically
Press MENU to display the menu main page.
Press repeatedly to select CHANNEL item.
Press ENTER or to access the submenu.
Press repeatedly to select Auto Search item.
Press to start the process of auto searching. The unit stores all available channels in memory automatically.
During the process of the Auto Search, you can press MENU to exit.
Note: Before you start Auto Search, please refer to the section of [Setting Colour and Sound System] to select a proper sound system according to your area.
CHANNEL
Channel Edit |
|
Auto Search | Right to select |
Manual Search | L/R to select |
Skip | OFF |
AFC | ON |
Fine Tune | +00 |
Storing Channels in Memory Manually
Use Manual Search if desired channels cannot be memorised or if you would like to store channels to specific channel numbers one by one.
Press MENU to display the menu main page.
Press repeatedly to select CHANNEL item.
Press ENTER or to access the submenu.
Press repeatedly to select Manual Search item.
Press start manual search.
Pressing the set searches towards higher frequency; Pressing the set searches towards lower frequency;
The search stops when a program is found and this program will be stored in current channel.
CHANNEL
Channel Edit |
|
Auto Search | Right to select |
Manual Search | L/R to select |
Skip | OFF |
AFC | ON |
Fine Tune | +00 |
Setting Auto Frequency Control (AFC)
Press MENU to display the menu main page.
Press repeatedly to select CHANNEL item.
Press ENTER or to access the submenu.
Press repeatedly to select AFC item.
Press to select ON or OFF.
When the AFC is set to ON, the unit will automatically tune the program frequency to provide the best possible picture and sound.
CHANNEL
Channel Edit |
|
Auto Search | Right to select |
Manual Search | L/R to select |
Skip | OFF |
AFC | ON |
Fine Tune | +00 |
18