Palsonic PDP5055HD owner manual Important Notice, Do not use in hot and cold rooms locations

Page 6

Important Notice

About Temperature

About After-Image

Cleaning and

Maintenance

Do not use in hot and cold rooms (locations)

!When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

!Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the screen to malfunction.

!Storage temperature: 0°C to +50°C

!Working temperature: 5°C to +40°C

The extended use of fixed image program material can cause a permanent after-image on the screen.

This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible screen deterioration can be limited by observing the following steps:

A. Reduce the brightness/contrast setting to a minimum viewing level.

B. Do not display the fixed image for extended periods of time.

C. Turn the power off when not in actual use.

Important Information Regarding Use of Video Games, Computers,

Captions or Other Fixed Image Displays.

!Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the screen.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

CAUTIONS:

!The permanent after-image on the screen resulting from fixed image use is not an operating defect and as such is not covered by the warranty.

!This product is not designed to display fixed images for extended periods of time.

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.

!Use eyeglass cleaner to remove stubborn dirt from the screen.

!Never use alcohol, paint thinner or benzine to clean this unit.

!Before using a chemically treated cloth, read the instructions that came with the cloth carefully.

3

Image 6
Contents N111 Important Information Table of Contents Important Safety Precautions Important Safety Precautions To clean this unit, wipe with a soft, dry cloth Important NoticeDo not use in hot and cold rooms locations Using the Remote Control Installing the BatteriesPreparations Power Connection AntennatennaConConnectionectionIdentification of Controls Indicator Remote Sensor Power Switch CH+Power Main Unit front view/side viewMain Unit rear view Remote Control Unit Coaxial cable Connecting digital coaxial audioConnections Coaxial HIFi SystemConnecting a Camcorder Connecting an Hdmi deviceTo connect a device using component video Connecting Component VideoConnecting a Computer To play component video from an external deviceConnecting a VCR for Recording Connecting HeadphonesTo record program List of main menus to help you with operations Basic OperationsMain Menu Overview To navigate through the OSD main menuDisplaying the Information Banner Turning On/Off the PowerSelecting the Input Signal Source Turning OnManual Searching for DTV programs Memorizing the ChannelsAuto Channel Search Press Menu and the main menu screen displaysManual Fine Tuning Setting Audio SystemManual Searching for ATV programs Setting Favorite Channels Labeling ChannelsOpen the Programme Edit menu To sort channels Channel List ManagementTo skip unnecessary channels To delete channelsChannel and Program Selection Picture Adjustment Customizing the PictureAdjusting the Sound Sound AdjustmentAdjusting the Volume Using the volume buttons VOL+ and VOLNicam Broadcast Selection Stereo/Bilingual Selection for analog channelsAudio Track Selection for digital channels IGR German stereo system BroadcastsLanguage System SetupSystem Setup Hearing ImpairedBlock Program Setup Rating and Lock SetupPassword Setup To create a new passwordParental Guidance Setup DTV only Lock Tuning SetupRestoring Factory Default On Timer Setup Timer SetupCurrent Time Setup Time Zone SelectionOff Timer Setup Sleep Timer SetupAuto Sleep Setup EPG Operation OperationProgram’s information will be displayed Teletext & Subtitle TeletextSubtitle Auto adjust Screen Setup for D-SUBPC ModeScreen Setup Such as position and phaseTroubleshooting Remote control does not operateDouble images Displayed Section Current input modeOne or some channels can’t be Select them with 0-9 number buttonsSpecifications PDP TVVer