Parts of the Remote
Controller
1.
(MUTE): Press this button, and the sound goes off. Press again, and the sound returns.
2.
(POWER): TV on/off button in
3.DTV/ATV: Each time you press this button, the TV will
cycle through : ATV => DTV
4.AV/COMP: Each time you press this button, the TV will
cycle through:
Video 1 => Video 2 => Comp. 1 => Comp. 2 => Video 1
5. HDMI/PC: Each time you press this button, the TV will cycle through : HDMI => PC => HDMI
6. NUMBER: Press the numbers on this board, you can select PR directly in TV mode. (EX. When you want to select PR10, you should press down “1” and “0” within
2 second. If you only press down “1”, after 2 second, PR1 will be selected.)
Note.: When the current state is
7. LOCK : Prevent the use of the TV set without the remote control.
8. 
: You can select sound mode in Mono, Stereo.
9. 
PR 
: Change programmes on TV mode.
10. 
VOL 
: Adjust the volume.
11. MENU: Menu display button.
12. OK/SELECT: Confirm to change a part of the menu.
13. SUBTITLE : Select the Subtitle Language. It works only in DTV
14.GUIDE : Access Electronic Program Guide (EPG). It works only in DTV
15. FAVOURITE: Each time you press this button, the programme will change selected (favourite) programmes on TV mode. See page 32.
16.PIP: Select either PIP/POP On or Off
17.P.POSITION: Move the sub window position in PIP mode.
Position: left bottom => left top => right top => right bottom
18.P.SWAP: Swap the main screen for sub screen.
19.P.INPUT: Sub Screen input mode change as follows PIP table mode or POP table mode.
20.STILL: Press this button to freeze the picture.
22