![](/images/new-backgrounds/1280343/28034337x1.webp)
Memorizing the Channels (Continued)
Manual Searching for ATV programs
If desired analog programs cannot be searched by Auto Tuning, you can make use of ATV Manual Tuning to search programs manually.
1 | In Channel menu, press 6or5to select ATV Manual Tuning |
| item, then press4or OK to access. |
2 | Highlight Storage To item, press 3or4button to select a channel |
| position in which you want to store. |
3 | Use 6or5to select Search item, press 3or4to begin the |
| manual ATV channel search. |
| Press 4, the unit searches towards higher frequency; | |
| Press 3, the unit searches towards lower frequency. | |
4 | The search stops when a program is found and this program will be | |
stored in current channel, then press the RED button to save. During | ||
| ||
| the process, If you want to stop the search , please press EXIT button. |
Manual Fine Tuning
Fine Tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound effect, use Fine Tune.
1 | Navigate to ATV Manual Tuning submenu, highlight Current |
| CH item, press 3or4to select a channel you want to perform fine |
| tune. |
2 | Press 6to select |
| fine tune until the best possible picture and sound are obtained. |
3 | During the process, press EXIT to exit, and RED button to save | |
the effect. | ||
| ||
| Note |
=Fine Tune is only for analog TV program.
Picture | Sound | Time | Option | Lock | Channel |
Auto Tuning |
|
|
|
| |
DTV Manual Tuning |
|
|
|
| |
ATV Manual Tuning |
|
|
|
| |
Programme Edit |
|
|
|
| |
| Select |
| Move | Menu | Exit |
ATV Manual Tuning | |||
Storage To |
| 1 | |
Color System |
| PAL | |
Audio System | BG | ||
Current CH |
| 1 | |
Search |
|
| |
|
| ||
Frequency | 445.25 MHz | ||
Exit | SAVE |
| Select |
ATV Manual Tuning | |||
Storage To |
| 1 | |
Color System |
| PAL | |
Audio System | BG | ||
Current CH |
| 1 | |
Search |
|
| |
|
| ||
Frequency | 445.25 MHz | ||
Exit | SAVE |
| Select |
Setting Audio System
Normally it is unnecessary to set audio system. However, if abnormal sound occurs, you may try to adjust the audio system.
1 | Navigate to ATV Manual Tuning submenu, press 5or6to |
| highlight the Audio System item. |
2 | Press 3or4to select the proper audio system. Press RED button |
| to save. |
3 | Press MENU to return to previous menu. Press EXIT to exit the | |
menu screen directly. | ||
|
ATV Manual Tuning | |||
Storage To |
| 1 | |
Color System |
| PAL | |
Audio System | BG | ||
Current CH |
| 1 | |
Search |
|
| |
|
| ||
Frequency | 445.25 MHz | ||
Exit | SAVE |
| Select |
16