Connections
Cautions before connecting
Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
Connect a Decoder
How to connect:
Connect the SCART Cable between the unit and the Decoder.
To watch Decoder
1.Turn on your LCD TV, press SOURCE 
button on the remote control.
2.Push ENTER (Up/Down) to select SCART 1 and press ENTER to confirm.
3.Turn on your Decoder.
Decoder
Select Main Source
1.TV
2.Video
3.
4.SCART 1
5.SCART 2 AV
6.SCART 2 Y/C
7.YPbPr
8.
9.HDMI
Note:
1.The unit receives CVBS (VIDEO) signal and RGB signal from SCART1 interface and is able to identify the signal format automatically. The unit chooses the RGB signal prior to the CVBS (VIDEO) signal.
2.To connect to external devices with AV terminals, you may use
9