Palsonic TFTV681U Preparations, Using the Remote Control, Batteries for the Remote Control

Page 8

Preparations

Using the Remote Control

Use the remote control by pointing it towards the remote sensor window of the set.

Objects between the remote control and sensor window may prevent proper operation.

Note: the illustration is for your reference only, the remote sensor may locate differently with different model.

Cautions regarding use of remote control

Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity.

Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.

The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the remote control closer to the remote sensor window.

Batteries for the Remote Control

If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.

1Open the battery cover.

2

3

Insert two size-AAA batteries.

(Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment.)

Replace the cover.

Precautions on battery use

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below. Place batteries with their terminals corresponding to the (+) and (-) indications.

Different types of batteries have different characteristics. Do not mix batteries of different types.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak chemicals.

Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.

The batteries supplied with the product may have a shorter life expectancy due to storage conditions.

If the remote control is not used for an extended period of time, remove the batteries from the remote control.

Power Connection

Insert the AC socket into a conveniently located AC outlet.

Note:

This product should be operated only from the type of power source indicated on the marking label. Always unplug the AC cord from power outlet when not using for a long period of time.

5

Image 8
Contents N111 Table of Contents Table of Contents FCC Statement America only Important InformationImportant Safety Precautions Important Safety Precautions Example of Antenna Grounding AS PER National Electrical Code Using the Remote Control Batteries for the Remote ControlPower Connection PreparationsAntenna Connection Power Identification of ControlsMain Unit VOL+Headphone jack Hdmi input jack VGA input / Audio Antenna InputAV2 Inputs Video, Audio L/Mono, R / S-Video input Sleep How to connect ConnectionsConnect a VCR To play VCRConnect a Camcorder To playback CamcorderDVD player To play DVDTo Watch your Product Product with Hdmi jack How to connectConnect a product to Hdmi Connect a PC To Watch the PC screenTo record program VCR for recording How to connectRear of the VCR Viewing the Menus and Displays Turning the Unit On and OffTurning the Unit On and Off Manual Search Viewing TV ProgramsAuto Search Skipping Channels Exchanging ChannelSetting AFC Function on or OFF Manual Fine TuningChanging Channels Adjusting the VolumeBasic Operations Setting Sound System Select Input Source SignalSetting Colour System Customising the Picture Setting PictureUsing the Preset Picture Mode Adjusting Screen Aspect Freezing pictureSetting Timer Setting Clock TimeSetting on timer Setting OFF timerSetting Sleep Timer Customising the Sound Setting SoundUsing the Preset Sound Mode Adjusting On-Screen Displays Adjusting OSD PositionAdjusting OSD Transparency Setting OSD TimeoutSelecting the Signal Source fort he PIP Frame PIP OperationsViewing and Changing the Position of the PIP Frame Selecting Sound Source for PIP FrameAdjusting Image Size Adjustment in VGA ModeAdjusting the Picture Adjusting in VGA Mode Adjusting the Clock and PhaseAdjusting the Picture Automatically Changing the Position of ImageTroubleshooting Symptoms Check itemSpecifications LCD TVTEL 02 9313