Palsonic TFTV812U owner manual Basic Operations, Changing Channels, Adjusting the Volume

Basic Operations

Changing Channels

Using the Channel Buttons (CH+ or CH-)

Press the CH+ or CH- to change channels.

When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorised.

You will not see channels that were erased.

Direct Accessing Channels

Press the number buttons to go directly to a channel.

To select a one-digit channel: press the 0-9 number buttons to input the channel number and the unit automatically to goes the selected channel.

To select a two-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to the selected channel immediately.

To select a three-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to the selected channel.

Note:

When you use the number buttons, you can directly select channels that were skipped.

The period of two-press should be within 2 seconds

Using the Return button

Press this button to switch between the current channel and the previous channel.

Adjusting the Volume

Using the volume buttons (VOL+ and VOL-)

Press the VOL+ or VOL- to increase or decrease the volume.

Using the MUTE button

At any time, you can temporarily cut off the sound using the MUTE button. 1 Press the MUTE button and the sound cuts off.

2 To turn mute off, press the MUTE button again.

20