Memorex MT1120A owner manual Troubleshooting Guide, Specifications, Symptoms Possible Solutions

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.

SYMPTOMS	POSSIBLE SOLUTIONS
TV does not	• Make sure the power cord is plugged in.
	• Try another AC outlet.
operate
	• Power is off, check fuse or circuit breaker.
	• Unplug unit for an hour, then plug it back in.
Poor sound	• Station or CATV experiencing problems, tune
	to another station.
or No sound
	• Check sound adjustments (Volume and
	Muting).
	• Check for sources of possible interference.
	• Station or CATV experiencing problems, tune
Poor picture	to another station.
	• Check antenna or CATV connections, reorient
or No picture
	antenna.
	• Check for sources of possible interference.
	• Check picture control adjustments.
	• Station or CATV experiencing problems, tune
Poor recep-	to another station.
	• Station signal is weak, reorient antenna to
tion on some	receive weaker station.
channels
	• Check for sources of possible interference.
	• Station or CATV experiencing problems, tune
	to another station.
Poor color or	• Make sure channels are set into memory.
no color	• Check picture control adjustments.
	• Check antenna or CATV connections, reorient
	antenna.
	• Check for sources of possible interference.
Picture	• Station or CATV experiencing problems, tune
	to another station.
wobbles	• Make sure channels are set into memory.
or drifts
	• CATV company is scrambling signal.
	• Check antenna orientation.

SYMPTOMS	POSSIBLE SOLUTIONS
No CATV	• Check all CATV connections.
	• Set TV/CATV menu option to the CATV mode.
reception
	• Station or CATV system problems, try another
	station.
Horizontal or	• Check antenna connections, reorient antenna.
diagonal bars	• Check for sources of possible interference.
on screen
No reception	• Make sure TV/CATV menu option is in the
above	appropriate mode.
channel 13	• If using antenna, check UHF antenna
	connections.
	• Batteries are weak, dead or inserted
No Remote	incorrectly.
	• Remote is out of range, move closer to TV
operation
	within 15 feet.

•Make sure Remote is aimed at sensor.

•Confirm there are no obstructions between the Remote and the TV.

•Make sure the power cord is plugged in.

•No broadcast on station tuned.

TV shuts off • Sleep Timer is set.

•Power interrupted.

•TV station experiencing problems or program

Closed - tuned is not closed captioned. Try another

Caption is	channel.
not activated. • Check CATV connection or VHF/UHF antenna,
	reposition or rotate antenna.
	• Press TV/CAPTION/TEXT button to turn on
	the closed caption decoder.

Display is not

shown in your • Select proper language in the menu options. language.

ENGLISH

SPECIFICATIONS

AC Power Input:		120 V, 60 Hz	Receiving Channels:
AC Power Consumption:		95W	VHF		2-13
Chassis Construction:		IC Solid state	UHF		14-69
Picture Tube:		20" (measured diagonally)	CATV		01-97 (5A)-(A-3)
Audio Power Output Rating:		2.5 + 2.5 W			98-99 (A-2)-(A-1)
Speaker:	6-1/3" x 2-1/4" Full Range, 32 ohm x 2				14-22 (A)-(I)
Tuner Type:	181 Channel, Quartz PLL Frequency Synthesized				23-36 (J)-(W)
Remote Control:		2 x AAA batteries (not included)			37-65 (AA)-(FFF)
					66-125 (GGG)-(125)
			Antenna Input Impedance:		75 ohm (VHF/UHF/CATV)
					Coaxial Input
			Dimensions:	23-5/8" (W) x 17-9/16" (H) x 18-7/8" (D)
			Weight:		46.3 Ibs

ACCESSORY: Remote Control

11

3G81501A E 11 12/8/99, 10:12 AM