Memorex MLT3221 warranty VIDEO7 Hdmi Computervga

Chapter 2 Installing the LCD TV

Press the INPUT button on the remote to display the Input Source List. Use the ▲▼ buttons to

select TV and press the OK button.

Input Source

TV(CABLE/AIR) VIDEO1 (SIDE) VIDEO2 (REAR)

VIDEO3 (S-VIDEO) VIDEO4 (YPbPr1) VIDEO5 (YPbPr2) VIDEO6 (HDMI 1)

VIDEO7 (HDMI 2)

COMPUTER(VGA)

Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the TV.

Channel Scan
Tuner Mode	Cable
Channel Skip
Favorite List
Time Zone	Eastern Time

TV Select Exit

Press the ▼ button to select Channel Scan, and press the OK button.

The Channel Scan automatically creates a list of receivable channels. Press the MENU button at any time to interrupt the memorization process.(the list cannot be created if interrupted)

Status: Scanning	Cable
Analog Channels: 25
Digital Channels: 0
	%

The Channel Scanning will create a list of receivable channels for the current input (antenna or cable). You will be required to run Channel Scanning for each RF input to create a list of available channels from both inputs.

Press the OK button to display the received channel list. Then press ▲▼ to select a channel and press again the OK button to display the channel detail.

Channel List	Channel Detail
5-2 RF5-2	Calfornia’s Gold
9-1 KQED-HD
9-2 KOED-SD
8 CCT
12
13
15

Or, use the ▪ (Input button) with 0-9buttons to select digital channel( for example 9.1)

The digital main channel might include many subchannels (for example 9-1, 9- 2..) that are showing program at the same time.

ENGLISH

17