Volume Control, Channel Memory Button | Motorola RC-U63CDR specification

~8214842.doc

[0]- Turns on / off CBL + TV (default setting)

[1]- Turns on / off CBL + TV and tunes TV to output Channel 3.

[2]- Turns on / off CBL + TV and tunes TV to output Channel 2.

[3]- Turns on / off CBL + TV and tunes TV to output Channel 4.

[10] - Turns on / off CBL + TV + VCR + DVD

[4]- Turns on / off CBL + TV + VCR + DVD and tunes TV to output Channel 3.

[5]- Turns on / off CBL + TV + VCR + DVD and tunes TV to output Channel 2.

[6]- Turns on / off CBL + TV + VCR + DVD and tunes TV to output Channel 4.

[11] - Turns on / off CBL + TV + VCR + DVD + AUDIO

[7]- Turns on / off CBL + TV + VCR + DVD + AUDIO and tunes TV to output Channel 3.

[8]- Turns on / off CBL + TV + VCR + DVD + AUDIO and tunes TV to output Channel 2.

[9]- Turns on / off CBL + TV + VCR + DVD + AUDIO and tunes TV to output Channel 4.

[12]- Turns on / off CBL + TV + AUDIO

[13]- Turns on / off CBL + TV + AUDIO and tunes TV to output Channel 3

[14]- Turns on / off CBL + TV + AUDIO and tunes TV to output Channel 2

[15]- Turns on / off CBL + TV + AUDIO and tunes TV to output Channel 4

3. As soon as you select an option, the [CBL] button will blink 3-times and go out.

Using the [ALL] SmartKey®

When pressing the [ALL] SmartKey®, be sure to keep the remote control aimed at your electronic devices until your electronic devices turn on or / off.

Whenever the [ALL] SmartKey® is pressed, the mode of the remote control will automatically switch back to Cable.

10.Volume Control

When you first program your remote, volume / mute are controlled through your TV (except AUDIO which defaults to the AUDIO device). The volume control options in each mode of the remote are:

CBL	TV (default), Cable or Audio.
TV	TV (default), Cable or Audio.
VCR	TV (default), Cable or Audio.
DVD	TV (default), Cable or Audio.
AUDIO	AUDIO device (default), Cable or TV.

To control volume / mute through your Cable set-top terminal in the remote’s Cable mode…

1.Press [CBL], then [OK] together until the [CBL] button illuminates.

2.Press [VOL +], then [CBL] for Cable volume. The [CBL] button will blink 3-times and go out. To return volume control to your TV, repeat step 1, then press [VOL +], then [TV] in step 2.

11.Channel Memory Button

Your remote has 1 Channel Memory button (See Section 15) which can store up to 5 cable channels. This button may come pre-set / labeled to channels selected by your cable operator. If this button has not been pre-set by your cable operator, it can be programmed as follows:

Programming Channel Memory Button

To program the [Channel Memory] button to cable channels 1, 12, 123, 1234, 17, follow these steps:

1.Press [Channel Memory], then [CBL] together until the [CBL] button illuminates.

-12 -