Metra Electronics OESWC-1761-RF installation instructions Replacing the battery

Replacing the battery

The battery that is used in the OESWC-RF is a CR2032.

To replace it please follow the instructions below.

1.Remove the OESWC-RF from the steering wheel by removing the Phillips screw from the back of the OESWC-RF and undoing the strap. (fig 1)

2.Remove the two Phillips screws that secure the

OESWC-RF together. (fig 2)

3.Unclip and remove the back cover by sliding the cover towards the outside of the

OESWC-RF.(fig 3)

4.Remove the board and replace the battery. (fig 4)

5.Reassemble the OESWC-RF

1

2

3

4

4