Motorola DV6001 warranty Setting up the Audio Setup, Audio OUT, Default setting 5.1 Channel

DVD Setup Menu

Setting up the AUDIO SETUP page

1Press the SETUP button.

2Select AUDIO SETUP PAGE using the cursor buttons (2/3), then press the ENTER button.

3Use the cursor buttons (5/∞) to select the desired item, then press the cursor (3) or

ENTER button.

AUDIO SETUP PAGE

AUDIO OUT

DIGITAL AUDIO

HDMI AUDIO OUT

CD UPSAMPLING

AUDIO DRC

Note

•Press 2 to go back to the previous menu item. Press SETUP to exit the menu.

AUDIO OUT

If you connected this player to your amplifier using the 5.1 channel analog outputs (front, surround, center and subwoofer outs), set this to 5.1 Channel; if you connected only the stereo outputs, set to 2 Channel.

•Default setting: 5.1 CHANNEL

•2 CHANNEL – Select this to change the channel output to stereo, which only delivers sound from the two front speakers and a subwoofer.

•VIRTUAL SURR – Select this to virtually reproduce the surround channels.

•5.1 CHANNEL – Select this setting when using a multichannel audio/(video) receiver with 6 channel inputs. In this mode, the player performs DTS decoding or Dolby Digital 5.1-channel decoding when applicable, and Dolby Pro Logic decoding on DVD-Video, Video-CD and Audio CD discs with 2-channel sound tracks. No Dolby Pro Logic decoding is done with Super Audio CD discs.

Note

•You can also select it using the SOUND MODE buttons on the remote control.

•Some DVD-Audio discs don’t allow downmixing of audio.

6

English

37