Lindy Personal Server instruction manual To access the WEB Server

Page 33

Management Guide

ƒAdministrator WEB Server: the administration port is the port for accessing the web-based management interface. The default is port 80.

ƒWEB Server: the WEB server allows users to construct a website using the HTML format. To activate the WEB server, click YES to enable. Specify a port number from 1

– 65535. WEB Folder is the location where you place your HTML files.

Note:

1.By default, port 80 is not allowed to be setup as it has been configured as the port for accessing the web-based management interface.

2.A website template is provided on the supplied CD. To use the template, copy the data in the folder on the CD named WEB Template. Paste this data into the folder you have configures as the WEB Folder.

To access the WEB Server...

The address for linking the WEB Server is the IP address of the Personal Server with a colon and then the port number, e.g. use – 192.168.1.1:8080 when the IP address of the Personal Server is 192.168.1.1 and the port number of the WEB server is configured as 8080)

Note:

For WAN users to gain access to the FTP or WEB server, you should link the Personal Server to a router with the appropriate configuration. Please ensure:

1.The NAT functionality in your router is enabled.

2.In the port-mapping settings, the Internal Host IP should be configured as the IP address of this Personal Server and the value of the Port should correspond to the port number of the WEB server or FTP server you configured.

(e.g. If the IP address of your Personal Server is 10.10.7.251, the port number of your FTP is configured as 21 and the port for the WEB server is 8888, then you should add or modify a port mapping record: set the internal host IP address to 10.10.7.251, the port as 21, and then add or modify another port mapping record. Set the internal host IP address as 10.10.7.251 and the port as 8888).

3.Before allowing the device to communicate with the internet, we strongly recommend the use of a Firewall to secure the network.

Page 33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Personal Server Contents What’s in the box? LED Indicators Product InformationFront Panel Configuring network protocols IP Protocol SetupHow to configure your PCs TCP/IP settings 192.168.1.2 toConfiguring TCP/IP settings Windows 98/Me Click Start Settings Control Panel NetworkSelect TCP/IP Your Ethernet Adapter , then click IP Protocol Setup Configuring TCP/IP settings Windows Click Start Settings Network and Dial-upConnections Properties Select Use the following IP address. Enter the IPStart Settings Control Panel Network Connections Properties Configuring TCP/IP settings Windows XPIP Protocol Setup Hard Disk Installation IDE ConnectorScrews Power Connector Quick Setup Wizard Starting the Quick Setup WizardActivate the utility software To access the hard drive Setup the Personal Server Management GuideHome Status ConfigurationStatus Detail Click here for more informationHost Name Setting IP Address SettingIP Filter Superuser/Password SettingSystem Restart MAC FilterHD Format Factory Default ResetClick Browse Firmware Upgrade System TimeCharacter Set To add a user User ConfigurationFolder Configuration To change the user configurationTo add a folder To delete a userTo delete a folder To change the user authentication of a folderFTP Configuration Important Note BitTorrent Configuration To add new downloading tasks Download ConfigurationManagement Guide Management Guide To access the WEB Server Backup Start Programs Accessories System Tools BackupApplications Ftp// domain name or IP address Remote BackupWeb Server DownloadTroubleshooting Specifications Certifications TrademarksLindy No
Top Page Image Contents