Marshall electronic V-R1041DP-TE specifications Product Overview, Features, Optional Accessories

1Product Overview

The V-R1041DP-TE /V-R1042DP-TEis a direct replacement for 8 and 9-inch CRTs used in broadcast and professional video applica- tions. This cost-effective model features our award-winning all-digital TFT-Megapixel™ LCD panel with 2.4 million pixels, along with our HyperProcess™ de-interlacing algorithm producing the smoothest motion available on a TFT LCD. Video is scaled to fit on the screen in the highest possible resolution utilizing a state-of-the-art LSI with 6x6 pixel interpolation, precision gamma correction, and Match Color Conversion™ to produce the highest quality images available.

2	Features
TFT-MegaPixel™ Display		All signals remain completely digital to provide the most exact images available.
1024x768 Dots (2.4 Million Pixels)
SD/HD SDI Input		SMPTE 259M-C, 292M / ITU-R BT.601; 1080i/60,59.95,50; 1080psF/24,23.98; 1035i/60, 59.94;
		720p/60,59.94,50,30,29.97,25
Durable metal enclosure		Protection for all connections and controls with strategically placed ventilation for use in harsh envi-
		ronments
Protective Screen Cover		Optical grade polycarbonate screen cover with Antireflective/Antiglare coating
HyperProcess™		Display interlaced images without smearing or sacrificing of temporal resolution with our proprietary
		interpolation algorithms. Images are then displayed at a sample rate equal to the frame rate.
MatchColor Conversion™		Factory programmed to closely match typical SMPTE/CIE color metric and color temperature specifi-
		cations. This model is adjusted for D-65 color temperature and 72% SMPTE color gamut
OSD		On screen display of Format and Ratio
50,000 hour backlight life		Backlights are the most common failure on a TFT/LCD monitor. This backlight system has an MTBF
		of 5 years and uses specially designed lamps to provide brighter images.
Tally		2 LEDs (Green, Red) per monitor
3	Standard Accessories	Accessories Supplied with the V-R1041DP-TE / V-R1042DP-TE

•User’s manual

•“Brick” type 12VDC power supply with 2-pin twist-lock connector

4Optional Accessories

Articulating Arm V-MG11043 Attach monitor to 1/3” mounting hole

Recommended Anti-Static Cleaners and Polishes

210 Plastic Cleaner & Polish and 210 Plus Cleaner	20/20 Plastic-Cleaner
Sumner Laboratories	Craftics, Inc.
186 Lincoln Street	PO Box 91930
Boston, MA 02111	Albuquerque, NM 87199
617-542-8656 / Fax: 617-482-9001	(505) 338-0005
Crystalclean	Plexus Plastic Cleaner
Discovery Plastics	Plexus
3700 Western Way, NE	638 Lindero Canyon Rd. #371
Millersburg, OR 97231	Agoura, CA 91301
541-926-2900 / Fax: 541-967-8441	800-405-6495
www.discoveryplastics.com	Fax: 818-879-0697
Scotch-Brite High Performance Cloth	NOVUS #1 Plastic Clean and Shine
3M Stationery & Office Supplies Div.	NOVUS, Inc.
3M Center	12800 Highway 13 South, Suite 500
St. Paul, MN 55144-1000	Savage, MN 55378
877-362-5684	800-548-6872 ext.451
Fax: 651-733-0382	Fax: 952-946-0435
www.mmm.com
The Simco Industrial Static Control	Exair Corporation
An Illinois Tool Works Co.	1250 Century Circle North
2257 North Penn Road	Cincinnati, OH 45246-3309
Hatfield, PA 19440-1998	513-671-3322
800-203-3419	Fax : 513-671-3363
215-822-2171	www.exair.com
Fax: 215-822-3795
www.simco.biz

8Operational Setup

1.Unpack the V-R1041DP-TE / V-R1042DP-TE and accompanying power supply. Physically inspect for any damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the continental united states call +1 310-333-0606.

2.The V-R1042DP-TE can be mounted in an standard EIA 19-inch rack. The rack ears on both the V-R1041DP-TE and V- R1042DP-TE can alternately be used as a table-top stand.

3.Connect required cables for signal input and output. Please note that power must be applied to the V-R1041DP-TE /

V-R1042DP-TE for the video output to be activated. All BNC connectors should be rated for 75Ω.

4.Plug the V-PS12-5V-1 power supply into an A.C. source. Attach the 2-pin twist-lock power connector to the back of the monitor. Please note that DC power can be supplied directly to the monitor from a variety of sources, such as a battery adapter or vehicle power. In operation, the V-R1041DP-TE / V-R1042DP-TE will draw approx. 1. amp.

Attach 2-pin twist-lock power connector from VPS12-5V-1 power supply to the back of the unit.

5.Turn on the V-R1041DP-TE / V-R1042DP-TE by pressing the power switch located on the front of the unit.

Mount for IDX Batteries	V-R65-BA	Use with V-Mount batteries
Sun Hood	V-H10M	Use for outdoor viewing or
		in brightly-lit areas
Power Adapter Cable	V-PAC-D	Use with Anton Bauer D-type connection
Power Adapter Cable	V-PAC-XLR	Use with 4 Pin XLR connections

9Input Connectors

Tally Pinout (HD-15)

Pin No.	Signal
1	Green (Monitor 1)
2	Red (Monitor 1)
3	N/C
4	Ground
5	Ground
6	N/C
7	N/C
8	N/C
9	N/C
10	N/C
11	Green (Monitor 2)
12	Red (Monitor (2)
13	N/C
14	Ground
15	Ground

* Tally lamps active when connected to ground

12VDC Power Input

HDSDI Input/Output

(Active output requires monitor

to be powered)

2		Marshall Electronics	5
	V-R1041DP-TE / V-R1042DP-TE User’s Guide