Marshall electronic V-R102DP-2SDI warranty Product Overview, Mechanical Specifications, Features

1Product Overview

The Rack mounted and tiltable V-R102DP-2SDIrepresents leading edge technology in LCD imaging for broadcast and pro- fessional video applications featuring High Resolution, 1.44 megapixel, TFT screens with completely digital signal process- ing. All video formats are scaled to fit on screen in the highest resolution using a state of the art LSI that incorporates 4x4 pixel interpolations with precision Gamma correction.

4Mechanical Specifications

Dimensions	19.12” w x 8.67” h x 1.5” d (485.7mm x 220.22mm x 38.1mm)
V-R102DP-2SDI Weight	5.5 lbs (2.4 kg)
V-PS12-5V-1 Power Supply Weight	1 lbs (0.45kg)

2 Features

• TFT-MegaPixel ™ totally digital end to end signal processing

• 2 SDI (SMPTE259M) (ITR-U601) inputs per screen

• Switched SDI output of on screen video is reclocked

• ColorMatch Conversion™ D65 and SMPTE/EBU color space emulation of CRT

• User control for gain and bias of Red, Green, and Blue colors

• HyperProcess™ motion interpolation of interlace images

• On screen display of input status, formats, and menu functions

• Pixel to Pixel native resolution display

• Ready to mount – all brackets are factory installed

• Lightweight – 75% lighter than CRT models

• Direct access for screen adjustments and selections.

• Settings memory restores active state with power off/on cycle

• Easy to use front panel selection of inputs

• Blue Gun for adjustment to SMPTE color bars

• Includes V-PS12-5V-1 Universal power supply (U.L. class 2)

• Three LEDs (Red, Green, Amber) produce 7 different tally indications

• Unique 180 degree tilt adjustment

V-PS12-5V-1

Universal power supply (U.L. class 2)

5Operational Setup

1.Unpack the V-R102DP-2SDI and accompanying V-PS12-5V-1 power supply. Physically inspect for any damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the continental united states call +1 310-333-0606.

2.After inspection, install in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is required when installed to prevent possible damage to the V-R102DP-2SDI internal components.

3.Connect required cables for signal input and output.

Please note that power must be applied to the V-R102DP-2SDI for all outputs to be activated. All BNC connectors should be rated for 75Ω.

4.Plug the V-PS12-5V-1 power supply into the A.C. source

5.Attach twist lock power connection from V-PS12-5V-1 power supply to the back of the unit.

6.Turn on the V-R102DP-2SDI by depressing the power switch located on the front of the unit.

• Dry erase label for each screen

6 Connectors

Tally IN

DB-15 Female

3Electrical Specifications

Number of Screens	2
Screen Aspect	4:3 / 16:9 switchable from front panel
Display (Viewing Area)	10.4 Inch diagonal (211.2mm w x 158.4mm h)
Viewing Angles	160 ̊ with protective screen and treatment (130̊H x 120 ̊V native)
Resolution (RGB Dots)	800H×RGBx600V (1.44 million pixels)
Dot Pitch	.264mm square pixel
Contrast Ratio	500:1
Pixel Response	10ms rise / 25ms fall
Brightness (in cd/m²)	400 cd/m²
Backlight	Field Replaceable CCFL (50,000 hour half life)
LCD Screen Treatments	Anti Reflection, Anti Glare, Hard Coat
Estimated MTBF	5 years of 24/7/365 operation
System	NTSC / PAL auto recognition
Inputs per display	2 SDI (SMPTE259M) (IT-R-BT601) per screen (BNC)
Active Outputs	1 SDI of on screen video (BNC)
Color temperature	D65 (6500 ̊Kelvin)
Color Gamut	SMPTE-C/EBU
Luma Linearity	Typical +/- 3% with 5 ire increments (0 to 10 ire)
Power Required	10.4 to 16.8 VDC
Power Consumption	Approx. 30 watt nominal
Operating temperature	32 ̊ F to 120 ̊ F (0 ̊ C to 50 ̊ C)
Storage temperature	-4 ̊ F to 120 ̊ F (-20 ̊ C to 50 ̊ C)
Compliance	Œ, FCC-Class A, ANSI-63.4 (Certificates on file)
RoHS WEE / Environmental	Do not dispose. Return to Manufacturer or Authorized Recycle Facility

* Tally lamps active when connected to ground

Monitor 2

SDI In

Channel 1 and 2

Pin1-M2Yel	Pin9-
Pin2-M2Red	Pin10-
Pin3-M2Grn	Pin11-M1Yel
Pin4-	Pin12-M1Red
Pin5-Gnd	Pin13-M1Grn
Pin6-	Pin14-
Pin7-	Pin15-Gnd
Pin8-

Monitor 1

SDI In

Channel 1 and 2

12 VDC from

V-PS12-5V-1 power

supply

Left Pin - Pos

Right Pin- Neg

2		Marshall Electronics	3
	V-R102DP-2SDI Users Guide