Stereo and Separate Audio Program SAP

STEREO AND SEPARATE AUDIO PROGRAM (SAP)

The TV is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Separate Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.

LISTENING TO SAP (SEPARATE AUDIO PROGRAM)

When the TV is turned on or a channel selection is made, make certain that the letters “SAP” appear on the screen. This means that the "Separate Audio Program" broadcasting is available.

TO SELECT DESIRED SOUND

Press the AUDIO SELECT button to select the desired sound.

LISTENING TO STEREO SOUND

When the TV is turned on or a channel selection is made, make certain that the word “STEREO” appears on the screen. This means that "Stereo" broadcasting is available. You can enjoy stereo sound from the left and right speakers.

•When the "Mono" broadcasting is received, no indication is displayed.

•If the broadcast signal is not strong enough or clear stereo sound is not available, press the AUDIO SELECT button to change to mono sound. The noise should be eliminated. Press it again to return to the stereo sound.

MONO+SAP BROADCASTING

MAIN SOUND	SAP SOUND	MAIN + SAP SOUND
(MONO)	SAP SOUND	(MONO)
(MONO)		(MONO)

STEREO+SAP BROADCASTING

MAIN SOUND						SAP SOUND
(STEREO)						SAP SOUND
(STEREO)


MAIN SOUND						MAIN + SAP SOUND
(MONO)						(MONO)

NOTE: If connecting this TV with a VCR and/or Cable box, to receive stereo sound you must use audio/video cables for all connections. You must also verify that your VCR and/or Cable box are stereo units.

SOUND ADJUSTMENTS

Sound controls are factory preset but you can adjust them indi- vidually as follows:

To display sound adjustments on the screen, press the MENU button. Press the SET + or – button to select the AUDIO option, then press the ENTER button.

BALANCE

Press the ENTER button until “BALANCE” appears on the screen, then press the SET + or – button to obtain an equal sound level from both speakers.

BASS

Press the ENTER button until “BASS” appears on the screen, then press the SET + or – button to adjust the bass sound.

TREBLE

Press the ENTER button until “TREBLE” appears on the screen, then press the SET + or – button to adjust the treble sound.

RESET

Pressing the RESET button while making sound adjust- ments will return all adjustments to the factory preset levels.

NOTE: The on-screen display will disappear 6 seconds after finishing an adjustment. The settings can only be adjusted when they are displayed on the TV screen.

ADJUSTING PICTURE

You can adjust the settings for color, sharpness, contrast, brightness and tint.

1	Press the MENU button.

2	Press the SET + or – button until the indicator next to
	"PICTURE" begins to flash, then press the ENTER button.

3	Press the ENTER button repeatedly to select the item you
	want to adjust.

4 Press the SET + or – button to adjust the setting.


	+	–
BRIGHTNESS	increase brightness	decrease brightness
CONTRAST	increase contrast	decrease contrast
COLOR	brilliant color	pale color
TINT	greenish color	reddish color
SHARPNESS	makes picture clearer	makes picture softer

		TO RETURN TO INITIAL SETTING
BRIGHTNESS CONTRAST COLOR	TINT SHARPNESS Press the RESET button while the picture adjusting mode
		appears on-screen.
		appears on-screen.

For additional set-up or operating assistance, please visit our WEBSITE at www.memcorpinc.com or

contact CUSTOMER SERVICE at 1-800-919-3647

Please keep all packaging material for at least 90 days in case you need to return this product to

your place of purchase or Memorex.

FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993

3L53901A-E

1/8/2002, 12:19