Memorex MT2252, MT2252 SERIES A owner manual Troubleshooting Guide, Symptoms Possible Solutions

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.

SYMPTOMS	POSSIBLE SOLUTIONS
TV does not	• Make sure the power cord is plugged in.
	• Try another AC outlet.
operate	• Power is off, check fuse or circuit breaker.
	• Unplug unit for an hour, then plug it back in.
	• Station or CATV experiencing problems,
Poor sound	tune to another station.
	• Check sound adjustments (Volume and
or No sound
	Muting).
	• Check for sources of possible interference.
	• Station or CATV experiencing problems,
	tune to another station.
Poor picture	• Make sure channels are set into memory.
	• Check antenna or CATV connections, adjust
or No picture
	antenna.
	• Check for sources of possible interference.
	• Check picture control adjustments.
	• Station or CATV experiencing problems,
Poor recep-	tune to another station.
	• Make sure channels are set into memory.
tion on some
channels	• Station is weak, adjust antenna to receive
	desired station.
	• Check for sources of possible interference.
	• Station or CATV experiencing problems,
	tune to another station.
Poor color or	• Make sure channels are set into memory.
no color	• Check picture control adjustments.
	• Check antenna or CATV connections, adjust
	antenna.
	• Check for sources of possible interference.
	• Station or CATV experiencing problems,
Picture	tune to another station.
wobbles or	• Make sure channels are set into memory.
drifts	• CATV company is scrambling signal.
	• Adjust antenna.

SYMPTOMS	POSSIBLE SOLUTIONS
	• Check all CATV connections.
No CATV	• Set TV/CATV menu option to the CATV mode.
reception	• Station or CATV system problems, try
	another station.
Horizontal or	• Check antenna connections, adjust or
diagonal bars	re-direct antenna.
on screen	• Check for sources of possible interference.
No reception	• Make sure TV/CATV menu option is in the
	appropriate mode.
above
	• If using antenna, check UHF antenna
channel 13
	connections.
	• Batteries are weak, dead or inserted
	incorrectly.
	• Remote is out of range, move closer to TV
No Remote	(within 15 feet).
operation	• Make sure Remote is aimed at sensor.
	• Confirm there are no obstructions between the
	Remote and the TV.
	• Make sure the power cord is plugged in.
	• No broadcast on station tuned.
TV shuts off	• Sleep Timer is set.
	• Power interrupted.
No reception	• Reset your password.
	• TV station experiencing problems or program
	tuned is not closed captioned. Try another
Closed -	channel.
Caption is	• Check CATV connection or VHF/UHF
not activated	antenna, reposition or rotate antenna.
	• Press TV/CAP/TEXT button to turn on the
	closed caption decoder.
Display is not
shown in your	• Select proper language in the menu options.
language

ENGLISH

SPECIFICATIONS

AC Power Input:		120V, 60Hz	Receiving Channels:
AC Power Consumption:		110 Watts	VHF	2-13
Chassis Construction:		IC Solid state	UHF	14-69
Picture Tube:		25" (measured diagonally)	CATV	01-97 (5A)-(A-3)
Horizontal resolution:		260 lines		98-99 (A-2)-(A-1)
Audio Power Output Rating:		2.5 + 2.5 Watts		14-22 (A)-(I)
Speaker:	1-1/2" x 2-11/16" Full Range, 8 ohm x 2			23-36 (J)-(W)
Tuner Type:	181 Channel, Quartz PLL Frequency			37-65 (AA)-(FFF)
		Synthesized		66-125 (GGG)-(125)
Remote Control: Infrared, Direct Access, 2 x AAA batteries			Antenna Input Impedance:	75 Ohm (VHF/UHF/CATV)
		(not supplied)		Coaxial Input
			Dimensions: 24-5/16" (W) x 19-13/16" (D) x 20-11/16" (H)
			Weight:	59.9 Ibs

ACCESSORY

Remote Control

For additional set-up or operating assistance, please visit our WEBSITE at www.memcorpinc.com or

contact CUSTOMER SERVICE at 1-800-919-3647

Please keep all packaging material for at least 90 days in case you need to return this product to

your place of purchase or Memorex.

FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993"

11

11

3K00701B-E 11 18/08/2001, 14:54