Enjoying 2 Channel Digital Stereo Sound

CONNECTIONS

PAGE 17

ConnectingtoOptionalAudioSystem(Cont’d)

2 Channel Digital Stereo

You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and speaker system (right and left front speakers).

75 ohm coaxial cable or optical cable

To S-video Input or Video Input

S-Video cable or Video cable

To DIGITAL OUT	To S-VIDEO OUT
(COAXIAL or OPTICAL)	or VIDEO OUT

Connection example

Receiver equipped with a digital audio input

To digital audio input

Front speaker (left)

Front speaker (right)

Enjoying DTS Sound

Introducing DTS Digital SurroundTM...the finest technology ever invented to transform existing "home theatre" systems into six discrete channels of exceptionally clear, better-than-compact disc, digital audio performance. And DTS Digital Surround is the only 5.1 surround sound format that can deliver this revolutionary 3-dimensional experience through new music recordings on compact discs, original 5.1 soundtracks on motion picture laserdiscs, and soon, a wide variety of products on DVD.

	75 ohm coaxial cable or
	optical cable
	To S-video Input
	or Video Input
	S-Video cable
To DIGITAL OUT	or Video cable
To DIGITAL OUT	To S-VIDEO OUT
(COAXIAL or OPTICAL)	or VIDEO OUT

	Receiver equipped	Connection example
	with a DTS decoder
To digital audio input
		Front speaker
Front		(right)
speaker	Center
(left)	speaker
		Sub woofer
Rear speaker		Rear speaker
(left surround)		(right surround)

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Notes

❍Refer to the owner’s manual of your receiver as well.

❍Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

❍The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listen- ing level. Otherwise, the speakers may be damaged by a sudden high volume sound.

❍Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be damaged.

❍When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT jacks of the DVD video player is connnected to an amplification system. To enjoy DTS Digital Surround plaback, an external 5.1 channel DTS Digital Surround decoder system must be connected to the DIGITAL OUT jack of the DVD video player.