Video Setup
Component
You will get OFF, YUV or RGB of Component signal if you choose different item like picture 11.
OFF: The video frequency output has video and S- video.
YUV: The video frequency output has video, S- video and YUV. In this function the TV MODE is effective. You can select INTER- LACE or
RGB: The video frequency output has video, S- video and RGB.
HDMI: In this mode HDMI, YUV,
PREFERENCE SETTING
The DVD player must be in the stop mode or have the DVD door open to access the preference menu. To put the player in the stop mode, you must press the STOP button twice
TV TYPE
According to the system of TV to be connected, set the type of the video output to match the TV as picture 12
1.If the TV used is PAL, select PAL output signal;
2.Or select MULTI if TV is
3.If it is NTSC, select NTSC output signal;
Note:
To obtain the best DVD picture, it is strongly recommended to use
AUDIO/SUBTITLE/DISC MENU
The DVD player will play with your selected language at the AUDIO, SUBTITLE or DISC MENU. If the disc not recorded your selected language, the player will use defaults of the disc. (picture 13)
Note:
Audio and Subtitle language is subject to the availability of the disc menu.
PARENTAL CONTROL (pic-
ture 14)
When selecting one of the PARENTAL items, the screen will be changed to the
PASSWORD VERIFY PAGE.
When playing disc with parent
lock function, you may select an age control grade according to grade of disc and your desired. For example: Select
DEFAULT (picture 15)
If you select the RESET, each function setting returns to the initial status setting by the factory.
Note:
It does not, however, reset either the password or the parental control level.
PICTURE 11
PICTURE 12
PICTURE 13
PICTURE 14
PICTURE 15
E n g l i s h
17