Marantz VC4400 manual Troubleshooting, Symptom Cause Correction

Page 26

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Symptom

Cause

Correction

 

 

 

No power.

The power cord is disconnected.

Plug the power cord into the wall outlet

 

 

securely.

 

 

 

The power is on, but

No disc is inserted.

Insert a disc. (Check that the DVD or,

the DVD player does

 

audio CD indicator in the display

not work.

 

window is lit.)

 

 

 

No picture.

The TV is not set to receive DVD signal

Select the appropriate video input mode

 

output.

on the TV so the picture from the DVD

 

 

player appears on the TV screen.

 

 

 

 

The video cable is not connected

Connect the video cable securely.

 

securely.

 

 

 

 

 

The connected TV power is turned off.

Turn on the TV.

 

 

 

No sound.

The equipment connected with the

Select the correct input mode of the

 

audio cable is not set to receive DVD

audio receiver so you can listen to the

 

signal output.

sound from the DVD player.

 

 

 

 

The audio cables are not connected

Connect the audio cable securely.

 

securely.

 

 

 

 

 

The power of the equipment connected

Turn on the equipment connected with

 

with the audio cable is turned off.

the audio cable.

 

 

 

 

The Digital Audio Output is set to the

Set the Digital Audio Output to the

 

wrong position.

correct position, then turn on the DVD

 

 

player again by pressing POWER.

 

 

 

The playback picture is

The disc is dirty.

Clean the disc.

poor.

 

 

 

 

 

The DVD player does

No disc is inserted.

Insert a disc. (Check that the DVD, or

not start playback.

 

audio CD indicator in the DVD display is

 

 

lit.)

 

An unplayable disc is inserted.

Insert a playable disc. (Check the disc

 

 

type, color system, and Regional code.)

 

 

 

 

The disc is placed upside down.

Place the disc with the playback side

 

 

down.

 

 

 

 

The disc is not placed within the guide.

Place the disc on the disc tray correctly

 

 

inside the guide.

 

 

 

 

The disc is dirty.

Clean the disc.

 

 

 

 

The Rating level is set.

Cancel the Rating function or change

 

 

the rating level.

 

 

 

The remote control

The remote control is not pointed at the

Point the remote control at the remote

does not work properly.

remote sensor of the DVD player.

sensor of the DVD player.

 

The remote control is too far from the

Operate the remote control within 16 ft

 

DVD player.

(5 m).

 

There is an obstacle in the path of the

Remove the obstacle.

 

remote control and the DVD player.

 

 

The batteries in the remote control are

Replace the batteries with new ones.

 

exhausted.

 

 

 

 

 

 

 

 

Remote control code is different

Set the remote control codes of both

 

between the DVD player and Remote

DVD player and Remote control to the

 

control.

same setting.

 

 

 

26

Image 26
Contents Model VC4400 User Guide Safety Precautions Regulatory Information FCC PartImportant Safety Instructions Table of Contents Disc-related terms Before UsePlayable Discs Types of video CDsPrecautions About SymbolsRemote Sensor Front Panel and Display WindowDisc Tray Display window Forward Skip/Scan R / T Go to Next chapter/trackStop 9 Stops playback PAUSE/STEP Remote ControlSetting Remote control codes of Remote control SELECT/ENTER Acknowledges menu selection SlowOptical Digital audio out jack AC Power CordRear Panel Coaxial Digital audio out jackVideo connection Connecting to a TVConnections Component Video Color Stream connectionOUT jacks Optical O or Coaxial X to the cor Connections Connecting to Optional EquipmentDigital Multi-channel sound Amplifier ReceiverOn-screen display operation Before Operation General ExplanationOn-Screen Display Language Before Operation Initial SettingsInitial Settings General Operation PictureOthers Before OperationSound Country Code DVD Parental ControlRating DVD Changing the 4-digit codeSkipping discs Operation with DVD and Video CD Playing a DVD and Video CDExchanging discs during playback Exchanging the disc and starting playbackMoving to another CHAPTER/TRACK Operation with DVD and Video CD General FeaturesMoving to another Title Press Slow t or T during playbackDVD Video Discs Repeat Chapter/Title/All/Off Time Search3D Surround DVD Video CDs Repeat Track/Disc/All/OffSpecial DVD Features DVD About WMAWindow Media Audio Operation with Audio CD and MP3/WMA DiscAbout MP3 Repeat Track/All/Off MP3 WMA Moving to another Track CD MP3 WMARandom with MP3/WMA Disc MP3 WMA Random with Audio CD CDStill Picture Operation with Jpeg Disc Viewing a Jpeg disc JpegMoving to another File To flip the pictureProgrammed Playback with Video CD Programmed Playback with Audio CDProgrammed Playback with MP3/WMA Disc Erasing the Complete Program List Repeat Programmed TracksErasing a Track from Program List Additional Information Video Mode SettingSetting Remote control codes of DVD player Screen SaverTroubleshooting Symptom Cause CorrectionLanguage Code List Code LanguageCountry Code List Code CountryGeneral SpecificationsAccessories SystemIs a registered trademark

VC4400 specifications

The Marantz VC4400 is a high-performance audio/video cassette deck that has been a favorite among audiophiles and home theater enthusiasts alike. Known for its exceptional build quality and advanced features, the VC4400 offers users a seamless experience in capturing and reproducing audio and video.

One of the standout features of the Marantz VC4400 is its dual-capstan design. This technology ensures that tape transport is stable and consistent, which is crucial for maintaining sound integrity and reducing wow and flutter. The dual-capstan system provides superior tape handling, minimizing the risk of stretching or misalignment, ultimately resulting in high-quality playback and recording.

The VC4400 also boasts a three-head configuration, which includes a separate play, record, and erase head. This setup allows for more accurate sound reproduction compared to conventional two-head systems. The three-head design enables users to monitor audio recordings in real-time, ensuring that every detail is captured correctly. Coupled with high-quality components, the VC4400 delivers excellent frequency response and dynamic range, making it ideal for a variety of audio applications.

Another notable feature of the Marantz VC4400 is its onboard Dolby Noise Reduction system. This technology significantly reduces background noise and enhances the overall listening experience. It successfully minimizes tape hiss, allowing users to enjoy clearer and more vibrant sound quality. Additionally, the deck is compatible with Metal and Chrome tapes, offering versatility for various recording media.

The front panel of the VC4400 is user-friendly, with straightforward controls that allow for effortless operation. A large, illuminated display provides essential information, making it easy to monitor playback and recording status. The unit also features automatic tape sensing, which adjusts recording levels for optimal performance based on tape type.

Connectivity is another highlight of the VC4400. The deck is equipped with multiple inputs and outputs, making it simple to integrate into existing audio and video systems. RCA connections ensure compatibility with standard home equipment, while audio-ins and outs facilitate easy setup for recording or playback.

In summary, the Marantz VC4400 is a robust and feature-rich audio/video cassette deck that combines advanced technology with user-friendly operation. Its dual-capstan design, three-head configuration, and built-in noise reduction make it an exceptional choice for anyone looking to enhance their audio and video experiences. With its solid performance and reliable build quality, the VC4400 remains a sought-after component for both vintage and modern audio setups.