Marantz DV4500 manual Connection to a TV for video, Best picture, Picture

CONNECTIONS

Connection to a TV (for video)

TV

		Method 1	Method 2			Method 3
Basic		Good	Better	Best picture
Audio		picture	picture
							COMPONENT
								VIDEO IN
	R L	VIDEO IN	S-VIDEO IN		CR/PR Y CB/PB

Audio Cable

Video Cable

S-Video Cable

Component

Video

Cable

DVD

Analog	Video Out	S-Video Out	Component Video Out
Audio Out

•Method 1 DVD Player + TV with Video Input Jack

•Method 2 DVD Player + TV with S-Video Input Jack

•Method 3 DVD Player + TV with Component Video Jacks

NOTES:

•Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•S-Video output connector

The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.

If the TV is equipped with a S-Video input connector, we recommend connecting it to the this product’s S-Video output con- nector using a commercially available S-Video connection cord.

HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS

If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD

player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not includ- ed. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna termi- nal on your TV. Follow the instruction supplied with the RF Modulator for more details.

If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna

terminal as described above.

NOTE:

•The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator.

– 14 – EN