Clarion XAZ611 AC Processor Operations EQ effect ON/OFF, DSF effect ON/OFF, Selecting a G.EQ menu

AC Processor Operations

G.EQ effect ON/OFF STD mode/DSF operations

English

While the “G.EQ” indication ´ is lit in the dis- play, the G.EQ effect is set to “ON”.

∗The factory default setting is “ON”.

1.Press A-M button @and select “G.EQ”. While “G.EQ” is selected, “G.EQ” blinks in the dis- play.

2.Press DISP button 0.

3.Press A-M button @. “G.EQ” in the display is changed from blinking to lit or unlit.

*When “G.EQ” is unlit, the G.EQ effect is set to OFF.

Note:

•If the G.EQ effect is set to OFF, the adjustment made in “G.EQ operations” is not reflected in the music source.

DSF effect ON/OFF

When the “DSF” indication ´ is lit in the display, the DSF effect is set to “ON”.

∗The factory default setting is “ON”.

1.Press A-M button @ and select “DSF”.

2.Press DISP button 0.

3.Press A-M button @. “DSF” in the display lit or unlit.

∗When “DSF” is unlit, the DSF effect is set to OFF.

Note:

• If the DSF effect is set to OFF, the adjustment made in “DSF operations” is not reflected in the music source.

Selecting a G.EQ menu

1.Press A-M button @ and select “G.EQ”.

2.Press BND button ! to select “BASC” (ba- sic). “BASC” is displayed in the function mode indication 9 in the display.

3.Press one of Direct buttons 8 and select the desired G.EQ menu.

∗ To select the user memory, press BND button ! to select “USR” and press one of Direct but- tons 8.

Editing/storing a G.EQ menu (User memory)

1.Select a G.EQ menu which you want to edit on the basis of.

2.Press and hold ADJ button 2 for 1 second or longer.

3.Press the right or left side of SEARCH button % to select the frequency to be adjusted.

There are 50Hz, 100Hz, 200Hz, 400Hz, 1kHz, 3kHz and 12kHz available for the adjustment frequency.

∗For details on each adjustment item, refer to the owner’s manual supplied with the DPH910.

4.Turn the Rotary knob $clockwise or counter- clockwise to make the adjustment. The adjust- ment range is from –6dB to +6dB.

5.Repeat steps 3 to 4 to complete the adjust- ment and press ADJ button 2.

6.Press and hold one of Direct buttons 8 for 2 seconds or longer to store the edited contents.

∗You can give a title to the user memory. For the inputting method of titles, refer to the subsec- tion “Entering titles” in section “Operations common to each mode”.

Setting the listening position menu

1.Press A-M button @ and select “DSF”.

2.Press the right or left side of SEARCH button % to set the listening position type.

There are FULL SEAT, FRONT-RIGHT, FRONT-LEFT, FRONT (only front seats), REAR (only rear seats) and PASS available for the listening position types.

∗The factory default setting is “FULL SEAT”.

Making fine adjustment of the listening position

1.Upon completion of setting the listening posi- tion, press ENT button #.

2.Press the right or left side of SEARCH button % to select “BALANCE” or “FADER”. The se- lected item blinks.

3.Turn the Rotary knob $clockwise or counter- clockwise to adjust the balance and the fader.

4.Press ENT button # to return to the DSF mode.

Selecting a sound field menu

1.Press A-M button @ and select “DSF”. “DSF” blinks in the display.

2.Press BND button ! to select “BSC1” (ba- sic-1) or “BSC2” (basic-2). “BSC1” or “BSC2” is displayed in the function mode indication

9 in the display.

3.Press one of Direct buttons 8 and select the desired sound field menu.

∗ To select the user memory, press BND button ! to select “USR” and press one of Direct but- tons 8.

24 XAZ611