REMOTE CONTROL
The REMOTE CONTROL unit requires two 1.5 volt “AA” size batteries. The BATTERY COMPARTMENT is located on the back of the unit. To open, press down of the lid and slide toward the bottom of the unit. Install the batteries exactly as shown by the diagram in the compartment.
NOTE: If one or both of the batteries are reversed, the REMOTE CONTROL will not operate and the unit may be damaged.
This REMOTE CONTROL unit uses an INFRARED WIRELESS CONTROL SYSTEM. This means that the remote commands are sent out as invisible light. For best operation, aim the REMOTE CONTROL unit directly at the REMOTE CONTROL SENSOR window on the lower center front of the TV. Please note that furniture or other solid objects can block the path of the infrared light. Dark walls might absorb the light.
Do not allow strong sunshine to fall on the TV set front panel as this may affect the opera- tion of the remote control. In this case, tune the TV away from the light or darken the room slightly.
On Screen Display | VOLUME | CHANNEL | POWER |
Multi Function Remote |
|
|
R
15˚ 15˚
POWER
MENU
TV/VIDEO SLEEP
RECALL
Q.REV.
CHANNEL
MUTE 
VOLUME
– 4 –