KTI Networks KCD-300 Fiber Optical Specification, Katron Technologies Inc, KTI Networks Inc

EMI EMS Safety Environmental Tests :

Test		Standard		Specifications
FCC/EMI		FCC Rule Part 15					Class B
CE/EMC/EMI		EN55022, CISPR 22					Class B
CE/EMC/Harmonic		EN 61000-3-2					< 75 W
CE/EMC/VFF		EN 61000-3-3					Clause 5
CE/EMC/EMS		EN 55024
ESD Test		IEC 61000-4-2					+/-8KV
RS Test		IEC 61000-4-3		Strength:10V/m
EFT/BURST		IEC 61000-4-4			Power:+/-4KV
Surge Immunity		IEC 61000-4-5				Data:+/-2KV
CS Test		IEC 61000-4-6					Level 3
Magnetic Field Imm.		IEC 61000-4-8				50Hz 40A/m
Voltage Dips Imm.		IEC 61000-4-11		Interruption : C
							Dips : A
Safety		EN 60950, IEC 60950
Dielectric Voltage		IEEE 802.3		TP, 1500VAC/60sec.
Insulation Resistance		IEEE 802.3		TP, 500VDC/10Mohm
Cold Test		IEC 68-2-1 Test Ad				-20OC, 96hrs
Dry Heat Test		IEC 68-2-2 Test Bd		+70OC 40%RH 96hrs
Damp Heat Test		IEC 68-2-3		+60OC 90%RH 96hrs
Storage Test		IEC 68-2-48				-20OC 96hrs
				+85		O	C 40%RH 96hrs
Vibration Test		IEC 68-2-34
Ordering Information :
Model		FX Port	Ref.				Operating
KCD-300-xxx		Fiber	Distance				Temperature
-T		ST MMF	2km				-10 ~ 70OC
-C		SC MMF	2km				-10 ~ 70OC
-C1		SC MMF	2km				-20 ~ 70OC
-SA2		SC SMF	20km				-20 ~ 70OC
-SL2		SC SMF	20km				-20 ~ 70OC
-SL3		SC SMF	30km				-20 ~ 70OC
-SL4		SC SMF	40~50km				-20 ~ 70OC
-SL10		SC SMF	100km				-20 ~ 70OC
-W3515	Bi-Di SC SMF		15~20km				-20 ~ 70OC
-W5315	Bi-Di SC SMF		15~20km				-20 ~ 70OC

KCD-3PB	Panel mounting
	bracket for KCD-300

FCC Part 15' Class B

CISPR 22 Class B

Katron Technologies Inc.

15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,

Hsi-chih, Taipei Hsien, Taiwan.

Te l :886-2-2698-3878

Fax:886-2-2698-3873

E-mail:kti@ktinet.com.tw

URL:http://www.ktinet.com.tw

KTI Networks Inc.

7400 Harwin Dr., Suite 120 Houston,

Texas 77036 U.S.A.

Te l :713-266-3891

Fax:713-914-0555

E-mail:kti@ktinet.com

URL:http://www.ktinet.com

Trademarks: All brand names are trademarks or registered trademarks of their respective holders.

This information is subject to change without prior notice.

Fiber (FX) Port	Multimode ST, SC, Single mode SC
	100Mbps Full-duplex and half-duplex support
	MMF 50/125µm, 62.5/125µm fiber cable
	SMF 9/125µm cable
	Far End Fault Indication support
Flow Control	IEEE 802.3x for full-duplex, Back pressure for half-duplex
LEDs	- Power status
	- TP port link, activity, speed, duplex status
	- Per FX port link, activity, optical link status
Configuration Setting Switches	Auto/forced mode, TP speed, TP duplex FXduplex
DC Power Input	Screwed terminator block : 2 pairs of +/- contacts
	DC jack :	-D 6.3mm / + D 2.0mm
	Operating voltage range : +7 - +30VDC
Power Consumption	3W max. @30VDC power input
Dimension	28 x 82 x 95 mm, Weight : 250g
Housing	Enclosed metal with no fan
Mounting Support	DIN Rail mounting, Panel mounting
Environment	Operating Temperature: See ordering information
	Storage Temperature:	-20OC ~ 85OC
	Relative Humidity:	5% ~ 95% non-condensing
Approval	FCC Class B, CE/EMC Class B, EN60950 safety

Fiber Optical Specification :

Model	FX &Cable	Wavelength	Tx Power	Rx Sensitivity	Rx Max.Power
-T	ST MMF	1310nm	-19 ~-14 dBm	-31 dBm	-14 dBm
-C	SC MMF	1310nm	-19 ~-14 dBm	-31 dBm	-14 dBm
-C1	SC MMF	1310nm	-20 ~-14 dBm	-31 dBm	0 dBm
-SA2	SC SMF	1310nm	-15 ~-8 dBm	-31 dBm	-7 dBm
-SL2	SC SMF	1310nm	-15 ~-8 dBm	-30 dBm	-7 dBm
-SL3	SC SMF	1310nm	-15 ~-8 dBm	-34 dBm	0 dBm
-SL4	SC SMF	1310nm	-5 ~0 dBm	-35 dBm	-3 dBm
-SL10	SC SMF	1550nm	-5 ~0 dBm	-35 dBm	-3 dBm
-W3515	Bi-Di SC SMF	Tx 1310nm	-14 ~-8 dBm	-31 dBm	0 dBm
		Rx 1550nm
-W5315	Bi-Di SC SMF	Tx 1550nm	-14 ~-8 dBm	-31 dBm	0 dBm
		Rx 1310nm

080110