FUNAI MWD7006 owner manual Display Setting, Audio Setting

B DISPLAY Setting

You can change the display functions. Follow steps 1 to  in the “CUSTOM Menu” section on page 16.

Select the desired item.	5
	TV ASPECT: QUICK (Default: 4:3 LETTER BOX)
	See Hint on the left.			Select the
OK			TV ASPECT	desired
	TV ASPECT	4:3 LETTER BOX		setting.	OK
			4:3 LETTER BOX
	STILL MODE	AUTO
			4:3 PAN & SCAN
	PROGRESSIVE	OFF
			16:9 WIDE

6To exit the menu

SETUP

To complete the

DISPLAY menu			OK
		STILL MODE: (Default: AUTO)
DISPLAY		See Hint on the right.
TV ASPECT	4:3 LETTER BOX			STILL MODE
STILL MODE	AUTO	TV ASPECT	4:3 LETTER BOX
				AUTO
PROGRESSIVE	OFF
		STILL MODE	AUTO
				FIELD
		PROGRESSIVE	OFF
OK				FRAME
Hint			OK

OK

Select the desired setting.

OK

OK

PROGRESSIVE setting

OK

Hint

STILL MODE:

• Select “AUTO” usually.

Functions

TV ASPECT:

•Select “4: LETTER BOX”, so that black bars may appear on the top and bottom of the screen.

•Select “4: PAN & SCAN” for a full height picture with both sides adjusted.

•Select “16:9 WIDE” if a wide screen TV is connected to this unit.

PROGRESSIVE:

•You can set “PROGRESSIVE” to “OFF” in the DISPLAY menu or press and hold [PLAY B] on the front of the unit for more than 5 seconds during playback, so that the P-SCAN indicator on the front panel lights off.

•When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at all.

PROGRESSIVE: QUICK (Default: OFF)

See Hint on the left.

TV ASPECT	4:3 LETTER BOX	4:3 LETTER BOX
STILL MODE	AUTO	AUTO
PROGRESSIVE	OFF	ON

OK

If there is no picture or	Before proceeding…
you do not press any	1. Make sure your TV has progressive scan.
buttons for 15 seconds,	2. Connect with component video cable
	wait about 15 seconds for auto recovery.
	NOTE: If there is no picture or picture is
Progressive scan will	distorted after selecting ‘YES’,
	Activate Progressive?		YES
switch to “OFF” and			NO
	SELECT: K / L	SET:OK
it will exit the setup
menu.
	Confirm again to use progressive scan.
	If Picture is good, select ‘YES’.
			NO
			YES
	SELECT: K / L	SET:OK

SETUP

Select “Yes”.

OK

OK

Select “Yes”.

OK

• If you select “AUTO”,

automatically select the

best resolution setting

(FRAME or FIELD) based

on the data characteristics

of the pictures. (default).

• If you select “FIELD”, the

picture in the still mode will

be stabilized.

• If you select “FRAME”, the

picture in the still mode will

be highly defined.

• An individual picture on TV

screen is called a “frame”,

which consists of two

separate images called a

“field”.

• Some pictures may be

blurred at if you select

“AUTO” in the still mode

due to their data charac-

teristics.

C AUDIO Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to

in the “CUSTOM Menu” section on page 16.

Select the desired item.

OK

AUDIO menu

DRC (Dynamic Range Control): (Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

DRC	ON	OFF
DOWN SAMPLING	ON	ON
DOLBY DIGITAL	BITSTREAM	BITSTREAM
		OK

To exit the menu

SETUP

DRC:

		DOWN SAMPLING: (Default: ON)
AUDIO		Set to “ON” when outputting in 48kHz.
DRC	ON	Set to “OFF” when outputting the original sound.
DOWN SAMPLING	ON
DOLBY DIGITAL	BITSTREAM
OK		DRC	ON	ON
		DOWN SAMPLING	ON	OFF
		DOLBY DIGITAL	BITSTREAM	BITSTREAM
			OK
		DOLBY DIGITAL: QUICK		(Default: BITSTREAM)

Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.

•BITSTREAM: Outputs a Dolby Digital Signals.

•PCM: Convert the Dolby Digital into PCM (2 channel).

DRC	ON	ON
DOWN SAMPLING	ON	ON
DOLBY DIGITAL	BITSTREAM	PCM

•This function is available only on the discs which are recorded in the Dolby Digital format.

DOWN SAMPLING:

•When playing disc with copyright protection, the sound will be down sampled at 48kHz, even if you set to “OFF”.

•This function is available only on digital outputting of a disc recorded in 96kHz.

OK

-18- EN