FUNAI F100DB owner manual Parental Lock, Can then change the control level, Password settings

PARENTAL LOCK

1Press the SETUP button.

	Language
¡The setup screen will appear.	Display

Audio

Parental	Select : /	Set : ENTER
	Cancel :	Exit : SETUP

2Press the K/L buttons to select Parental, and then press the ENTER button.

Language
Display	Password
	Enter current password...
Audio
	_ _ _ _
Parental	Select : /	Set : ENTER
	Cancel :	Exit : SETUP

3Press the numeric buttons to enter the 4- digit password, and then press the ENTER button.

CONTROL LEVELS

¡Level 8

DVD software of any grade (adult/general/children) can be played back.

¡Levels 7 to 2

Only DVD software intended for general use and children can be played back.

¡Level 1

Only DVD software intended for children can be played back, with those intended for adult and general use prohibited.

Notes

¡With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

¡Record the password in case you forget it.

¡When doing this for the first time, enter any 4 digits. That number will be used as the password from the second time onward.

¡By entering the password, you	Language	Parental Contorols
		Change	7[NC-17]
		Parental Level
can then change the control level	Display
and password settings.	Audio
	Parental	Select : /	Set : ENTER
		Cancel :	Exit : SETUP

4Press the K/L buttons to select an item, and then press the ENTER button.

When Parental Level is selected

¡Press the K/Lbuttons to select an item from 8 to 1 and then press the ENTER button.

¡When Change is selected, press the numeric buttons to enter the four digits password. Then press the ENTER button.

Parental Contorols

Parental Level 7[NC-17]

Language Change

Display

	Parental Level			o
	5
Audio	4	[PG-13]
	3	[PG]		p
	2
Parental	Select :		/	Set : ENTER
	Cancel :			Exit : SETUP
		Parental Contorols
	Parental Level			7[NC-17]
Language	Change
Display		Password
	Enter current password
Audio
		_ _ _ _
Parental	Select :		/	Set : ENTER
	Cancel :			Exit : SETUP

IF YOU FORGET THE PASSWORD

1)Open the tray.

2)Press the 1, 2, 3, 4, then DISPLAY button on the remote control. the default setup screen will appear. Then, press the ENTER button.

3)Disconnect the power once and reconnect, then proceed the step 1 to 4 of the PARENTAL LOCK again.

Note: If you proceed the above steps, ALL the settings of the DVD player will be cleared. To use the DVD player under the previous settings, set each setting item all over again.

5Press the RETURN button.

¡The setup screen will appear.

– 24 – EN

9F21