Haier 25T3A, 25F3A owner manual Channels appointment, Press Disp button to exit the Timer menu

Setting the Timer (coutinued)

The channels appointment function can help you conveniently preset as many as six programs at a time. At the preset time, the TV set will automatically change to the preconcerted channel. If two or more programs are set in a same time, the last channel number will be selected.

Channels appointment

	CH+
VOL-	MENU	VOL+
	CH-

CH+

VOL- MENU VOL+

CH-

DISP

Channels appointment

1.Press MENU button, until
TIMER appears on the		TIMER
screen.		OFF TIMER	EVERY
			19:00
2.Press CH+/- button, move		ON TIMER	EVERY
			22:00
the indicator(	) to CLOCK,	POS	0
press VOL+/- button, and you		CLOCK	1:40
can set the time(same as		APPOINTMENT
TIMER OFF and it will be the
standard of the clock of APPOINTMENT).
		APPOITMENT
3.Press CH+/- button, move		POS	TIME
		100	OFF
the indicator(	) to	000	OFF
APPOINTMENT, then press		000	OFF
VOL+ button to enter the		000	OFF
		000	OFF
sub-menu.
		000	OFF
4.Press VOL+/- button to set
the channel number you want
(e.g. 100).		APPOITMENT
		POS	TIME
5.Press CH- button to enter		100	OFF
		000	OFF
the TIME item.Press VOL+/-		000	OFF
button to set the time.		000	OFF
Repeatedly press VOL+/- button,		000	OFF
		000	OFF
the time changes with a rate of
one minute;
Press the button without
releasing, the time changes with		APPOITMENT
a rate of ten minutes.		POS	TIME
6.Press the CH- button, and		100	12:58
		000	OFF
follow the instructions of step
		000	OFF
4 and 5, you can do the setting		000	OFF
of the next channel.		000	OFF
		000	OFF

7.Press DISP button to exit the TIMER menu.

At the preset time, the TV set will automatically change to the preconcerted channel;

This function is available only when the TV set is on, and it cannot be used in the status of standby or power off.