Connection to an Audio System
Method 1
Stereo system
Analog audio input jacks
AUDIO | R | L |
Audio cable
(supplied)
DVD player | AUDIO OUT L |
(Analog) | DIGITAL |
AUDIO OUT | AUDIO OUT |
| |
| COAXIAL R |
Note
•Set “DOLBY DIGITAL” to“OFF” for theAUDIO setting in the setup mode for method 1 only. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to pages
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Digital audio input jack
COAXIAL
Audio Coaxial
Digital cable
(commercially
available)
AUDIO OUT L
DIGITAL
DIGITALAUDIO OUT
AUDIO OUT
COAXIAL R
Note
•If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder, and set “DOLBY DIGITAL” to “ON” for the AUDIO setting in the setup mode. (Refer to pages
•The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck.
•Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “OFF” for the AUDIOsetting in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to pages
•Set “DOLBY DIGITAL” to “OFF”for the AUDIO setting in the setup mode for connecting to an MD deck or DAT deck. (Refer to pages
•By hooking this unit up to a
Setup
Rear Terminals
AUDIO OUT jacks |
| COMPONENT VIDEO OUT jacks | |
Connect the supplied audio cables here |
| Connect optional component video cables here | |
through the audio in jacks of a television or |
| through the component video in jacks of a television. | |
other audio equipment. |
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT L | Y | CR/PR COMPONENT |
|
| VIDEO OUT |
DIGITAL |
|
|
AUDIO OUT |
|
|
COAXIAL R | VIDEO CB/PB | |
| OUT | OUT |
COAXIAL jack |
| VIDEO OUT jack |
Connect an optional coaxial digital audio |
| Connect the supplied yellow video |
cable here through the coaxial digital audio |
| cable here through the TV’s video |
in jack of a decoder or audio receiver. |
| in jack. |
|
|
|
Connect an optional
– 7 – | EN |