Jasco RM84911, RM24911 instruction manual Using Your Remote, Code Identification

Using Your Remote

Code Identification

The Code Identifi cation Feature allows you to identify the three digit library code stored under your device button. For example, if you want to fi nd out what three digit code is stored under your TV device button, follow the six steps below:

1. Press and hold the SETUP button until the red indicator stays on. Release the SETUP button.

2. Press and release the desired device button (TV VCR, etc.). The red indicator blinks, then stays lit.

3. Press and release the SETUP button. The red indicator blinks once and remains lit.

4.To fi nd the fi rst digit for the code stored under the device button pressed in step 2, press each numeric button from 0-9in turn. The number that

causes the indicator light to blink is the fi rst digit in your code.

5.To fi nd the second digit, repeat step 4.

6.Repeat step 4 again to fi nd the third digit. This time the red indicator turns off and stays off.

8