Hughes & Kettner Preamp/Recording Amp instruction manual AMP for ALL Seasons, Pa Out

AMP FOR ALL SEASONS:

The Bass Advanced Tube Technology Amp / Preamp possesses a versatile array of jacks making the BATT at home in every conceivable situation, be it stage, studio, or practice. You can connect it to any speaker cabinet directly and use it as a practice amp head. You can connect it directly to a mixing console or multitrack recorder and use it as a studio quality bass preamp. You can connect it to a power amp and bass cabinet, using it as a live preamp. Or you can add it to an existing bass rig. (The BATT with its Advanced Tube Technology will breathe life into any sterile amp!)

S P E A K E R OUT:

the SPEAKER OUT jack on the rear panel of the unit is specially designed for direct connection to any desired speaker cabinet. The built-in 5 watt valve power amp (EL 84) is more than adequate for home practice or accompaniment. Like the signals for the other outputs, the SPEARER OUT can be switched to PRE or POST power amp: it delivers the same level whichever option is selected

PA OUT:

for connecting to the stage box during live gigs where a PA system is being used. The PA OUT signal delivers a constant LINE LEVEL SIGNAL and is therefore unaffected by the MASTER pot setting. However, gain, tone control and boost functions are still operative. When the TUBE / BYPASS switch is in BYPASS position, the PA OUT jack receives no signal, thus making it convenient to tune, or change basses.