DVD Functions, SAT Functions, Sleep Function

DVD Functions

This remote has several dedicated buttons used for DVD functions. The descriptions may vary from your original remote descriptions.

SCAN+ and SCAN- buttons control the speed of Fast Forward and Reverse Playback respectively. SKIP (Channel Up & Down) buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc.

SUBTITLE (CC) Turns the subtitles on or off. TITLE Brings up the DVD Title Menu screen. REPEAT A-Bbutton performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track.

INFO button brings up DVD Display or Control Menu for Chapter/Track/Title number, Time remain- ing/elapsed indication, system information, etc. PLAY button is used to start Disc playback and for Menu selection on some DVD players.

STOP button stops Disc playback.

PAUSE button pauses Disc playback - press PLAY to resume.

SETUP (INPUT) brings up the DVD Players Setup Menu.

SHIFT Press and release to access buttons labeled in red (red indicator stays on).

Press again to exit Shift mode. In Shifted mode the red arrows on the Ch and Vol buttons work as up/down and left/right navigation buttons.

MENU Press and release SHIFT then MENU to display the DVD disc menu on the TV.

The red LED is on continuously to indicate the remote is in Menu mode.

VOL UP/DOWN operate as cursor right/left. CH +/- operate as cursor up/down.

MUTE/OK button is used to select the on-screen item. Note some DVD players require the Play button to be used.

EXIT Exit On-Screen Menus and/or Return to previous On-Screen selection.

Note, not all DVD Players support all the functions described above.

SAT Functions

GUIDE button displays on-screen Satellite Channel Guide.

CHANNEL+ and CHANNEL- buttons perform the “Page+” and “Page-” function for on-screen Guide Menus used by some Satellite systems.

INFO button brings up Satellite Display screen for current Channel and system information.

MENU brings up the Satellite Menu screen - use with the UP, DOWN, LEFT & RIGHT navigation buttons.

OK button is used for on-screen Menu selection. EXIT button is used to Exit or Clear on-screen Menu displays.

INPUT/SETUP performs the TV/SAT function.

SLEEP Function

The Sleep button enables the remote to turn off your TV after a period of 1 to 99 minutes as shown below. The remote must be in TV mode to set a Sleep Timer. This feature works even if your TV does not have a sleep feature.

1. Press and release the TV mode button.

2. Press and hold the Sleep button until the LED remains lit (about 2-3 seconds).

3. Release the Sleep button.

4. Press and release the numeric keys (01-99) for the time required.

The LED will blink off to indicate button press acceptance.

5.TV Sleep Timer is set.

6.Leave the Remote pointing towards the TV with an unobstructed path.

To cancel the Sleep Timer, press and hold the Sleep button until the LED blinks, or press and release the Power key in TV mode.