Jasco 20626 instruction manual Direct Code Entry

Page 7

Direct Code Entry

1.Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.

2.Press and release the desired mode button (TV, DVD, etc.). The red indicator blinks, then stays lit.

3.Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.

4.With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.

Write your codes down here for easy reference later.

Device

Device stored

Code

 

 

 

TV

TV

 

DVD

 

 

 

 

 

CBL/SAT

 

 

DVR/AUX

 

 

 

 

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 20626 Table of Contents Introduction Button Functions Button Functions, Setup Direct Code Entry Code Search Code Identification Feature Programming Combo Device Codes Setup,Controlling Combo Devices Volume/Mute Control and Punch-Through Feature VCR/DVD/DVR Punch-Through FeatureSetting any Mode to use its own Volume/Mute Control Remote does not operate your product TroubleshootingRemote does not operate some features of your product Red Indicator blinks after you program a product codeDay Limited Warranty Universal Remote
Top Page Image Contents