RCA F25339 manual Plug in the TV, Put Batteries in the Remote, Turn on the TV

Connections & Setup

OK

Use the CHAN ^/v and VOL +/– buttons to move through the menu system. Use the MENU button to select items.

Plug in the TV

Plug the end of the power cord into the wall outlet. Match the wide blade of the plug with the wide slot in the outlet. Insert the plug completely into

the outlet.

Put Batteries in the Remote

1.Remove the battery compartment cover on the remote.

2.Insert new batteries. Match the polarities (+ and -) on the batteries with the diagram on the remote.

3.Put the battery compartment cover back on the remote.

How to Use the Remote Control to Complete the Interactive Setup

The technical term is “Navigation” – how you move through the on-screen menus. The theory is the same throughout the menu screens: highlight your choice and select it.

To highlight a menu item, use the CHAN ^/v buttons to move up or down. Use the VOL +/- buttons to move left or right or to change an item’s setting.

Use the MENU button to select menu items.

You can also use the remote’s number buttons to select menu items directly.

Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter, or a different color).

Turn on the TV

Press the TV button on the remote control or the POWER button on the front of the TV (the first screen of the Interactive Setup appears). The menu screens “time out” after a period of time if you don’t make a selection. The tips in this section tell you how to access the Setup menu screens manually.

Chapter 1 11