RCA F25423 manual Guide Plus+ System Setup, Identifying Your TV’s Location

Connections & Setup

Tip

If you move to a new zip or postal code, or if any of your information changes, you need to access the setup screens from the TV’s main menu— press MENU, choose GUIDE Plus+ Menu, and choose GUIDE Plus+ Setup.

The GUIDE Plus+ System Setup

The GUIDE Plus+ system is an on-screen interactive program guide that lists what shows are on TV in your area. In order to receive program listings, you need to complete the following steps.

The G-LINK cable must be connected to the back of your TV, and the wands must be placed in front of the remote sensor on the cable box and/or VCR in order for the GUIDE Plus+ system to work (go back to p. 12 for details).

1.You should see a screen displaying the features of the Guide Plus+ system. Press OK to continue.

2.The next screen asks you to locate setup materials and hardware. Once you have done this, press OK to continue.

Step 1: Identifying Your TV’s Location

1.If your country is highlighted, press OK on the remote control.

If your country isn’t highlighted, press the up or down arrow button on the remote control to highlight your country and press OK.

2.Use the number buttons on your remote to enter your zip code.

Press OK when you’re finished.

Note: If your postal code contains letters, press the up and down arrow buttons on your remote to enter letters, and press the right arrow button to go to the next space. The left arrow button moves you to the left.

Chapter 1 15