DVD RECORDER
Watching DVDs
Switch on
Switch on the television and select input
Switch on the recorder and start play
Switch off
Operating the DVD recorder
|
|
| Clear the menus or return to |
|
|
| the previous menu |
Show disc menus | Show recorder | Select and enter |
|
| menus | menu items |
|
|
|
| Stop play |
|
| Skip items during play | Pause play |
|
|
| |
| Search through the disc | Start | |
Start play from a selected item |
|
| |
|
|
| To view |
|
|
| 3 |
Operating the DVD recorder
Select drive
If it does not change
After performing the following operations, press this button again.
1.Press [DVD RECORDER].
2.While pressing [ENTER], press and hold [8] for approximately
2 seconds.
To return
In step 2 above, while pressing [ENTER], press and hold [9] for approximately
2 seconds.
The factory setting is [9].
When using a Panasonic
DVD recorder
Change the unit’s remote control code to match the remote control code of the DVD recorder.
Preparations: Check the remote control code of the DVD recorder.
For about one second press [ENTER] and the button ([1], [2] or [3]) which is the same number as the remote control code set by the DVD recorder.
The factory setting is [1].