!3TIMER
This switch is used to set the timer operation mode.
¡OFF
No timer operation is used when the switch is set to this position.
¡REC
Timer recording operation is activated when the switch is set to this position. The tape will automatically start record- ing when the power is switched on.
¡PLAY
Timer playback operation is activated when the switch is set to this position. The tape will automatically start playing when the power is switched on.
!4REC LEVEL CONTROL
For adjusting the record input level.
!5REC BALANCE CONTROL
Used to adjust the
!6FINE SPEED
Each well features ± 3% speed control.
!7PHONES SELECTOR SWITCH
This switch allows you to select Well A, Well B, or a mix of both Wells (A+B) in the phones.
!8PHONES LEVEL CONTROL
This control adjusts the volume of the headphone output.
!9PHONES JACK
Use this jack to connect a pair of headphones with a stereo 1/4" connector.
DISPLAYS
aTAPE TIME COUNTERS
These counters display the tape position for each Well in Minutes and Seconds.
bBARGRAPH LEVEL METERS
These meters display the signal levels for each Well in ste- reo.
cAUTO REW INDICATOR
These indicators will light up when the AUTO REW mode button t is pressed.
dCONT (CONTINUOUS) INDICATORS
These indicators will light up when the CONT mode button y is pressed.
eA+B INDICATOR
These indicators will light up when the A+B mode button u is pressed.
fTAPE SPEED INDICATORS
¡HIGH SPEED INDICATOR
This indicator will light up when the HIGH SPEED mode button i is pressed.
¡NORMAL SPEED INDICATOR
This indicator will light up when the NORMAL SPEED mode button i is pressed.
gOVERLAP RECORDING INDICATOR
This indicator will light up when the OVERLAP REC mode button o is pressed.
hMONITOR INDICATORS
These indicators will light up when in the TAPE MONITOR mode.
iBIAS RESET INDICATORS
These indicators will light up after the BIAS RESET program is run.
English
9