Operating Instructions
Connecting Additional Equipment
Connecting a TV and VCR
2
1 | VCR |
| |
From |
|
cable/antenna |
|
Rear of TV
134
Video (yellow)
Audio L (white)
Audio R (red)
Optional connection
✍To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your VCR).
1Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR.
2Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
✍You can use the button to switch between the VHF/UHF and VIDEO inputs.
✍For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound; you still must connect the audio cables.
10