Using the Remote Control and Basic Functions
Using the Remote Control
1 MUTING | Instantly turns off the sound. Press again or press | to restore the |
| sound. |
|
2 SYSTEM OFF | Powers off all Sony equipment at once (may not work with older | |
| equipment). |
|
3 TV/VCR | Press when you are finished using a VCR and you want to switch to | |
| the TV Antenna input. Your VCR power will remain on. | |
4 PICTURE MODE | Cycles through the available Video Mode settings. |
|
5 SLEEP | Turns the TV off automatically in approximately 15, 30, 45, 60 or 90 | |
| minutes. Cancel by pressing until SLEEP OFF appears. | |
6 JUMP | Press to jump back and forth between two channels. The TV | |
| alternates between current channel and the last channel that was | |
| selected. |
|
7 | Press for a direct selection of Effect settings (Simulated, WOW, SRS, | |
| Off) (see page 20). |
|
8 RESET | Press to return to factory settings while in an | |
9 VOL (volume) | Press when you want to adjust the volume. |
|
0 CODE SET | Use to program your remote control to operate connected video | |
| equipment (see page 32). |
|
qa POWER | Press when you want to turn connected equipment on or off. | |
qs FUNCTION | Press when you want to control connected equipment with your | |
| remote control. |
|
qd VCR/DVD | Operates VCR or DVD. Use when you want to operate connected | |
(operating) | VCR or DVD with your remote control. |
|
qf TV/VIDEO | Cycles through available video inputs. |
|
qg DISPLAY | Press once to show current time (if set) and channel number. Press | |
| again to turn DISPLAY off. |
|
qh MTS/SAP | Cycles through the | |
| Mono, and Auto SAP (Second Audio Program). |
|
qj 0 9 and ENTER | Change the channels directly. Press 0 9 buttons to select a | |
| channel, then press ENTER. |
|
qk GUIDE | Brings up the custom guide of your satellite receiver. |
|
ql | Moves the cursor in the | |
| move the cursor. Press the center button to select or access an option. | |
w; MENU | Displays the | |
| time. |
|
wa CH (channel) | Press when you want to change channels. |
|
If you lose your remote control, see page 36.
13 |