Operating Instructions
MTS
Multi-Channel
TV Sound
✍Press Mono).
Use the joystick to scroll up or down to select from one of the following options, then press to select it.
Stereo: Select when viewing a broadcast in stereo.
Auto SAP: Select to have the TV automatically switch to a Second Audio Program (SAP) when a signal is received.
Mono: Select to reduce noise in areas of poor reception.
button on the remote control for direct access to the MTS settings (Stereo, Auto SAP,
Speaker | Use the joystick to scroll up or down to select from one of the following | ||
Custom | options, then press | to select it. | |
selection of | On: | Select to listen to the sound from the TV speakers with or | |
audio output | Off: | without a separate stereo system. | |
source | Select to turn off the TV speakers and listen to the TV’s sound | ||
|
| only through external audio system speakers. |
Audio Out Use the joystick to scroll up or down to select from one of the following
Use to control options, then press to select it.
the TV’s volume Audio Out settings can only be set when speakers are set to Off. through a stereo Variable: Adjust the volume through your TV.
Fixed: Adjust the TV volume through a connected stereo.
✍Audio Out settings can only be set when Speaker is set to Off.
✍If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output sound, change your Audio MTS setting to Stereo or Mono.
36