Sony KV-20FS100 Using the Channel Setup Menu, Favorite, Cable, Channel Fix, Auto Program

Operating Instructions

Using the Channel Setup Menu

To access the Channel Setup menu, refer to the following steps:

To Display	To Highlight	To Select
MENU

Channel Setup
Favorite Channels
Cable : On
Channel Fix : Off
Auto Program
Channel Skip/Add
Channel Label
Move	Select	End

Favorite

Channels Quick access to favorite channels

Press g to open the Favorite Channels menu:

1Use the F or f buttons to select the position (1-5) where you want to set

a favorite channel, then press .

2Using the F or f button, select the desired channel.

3Press to change to the channel selected.

4Press G to return to the Channel Setup menu or press to exit.

	To use Favorite Channels: Exit all menus and press			. Press F or f to move the cursor to
	the desired channel number and press		.
Cable		On: Select if you are receiving cable channels with a CATV cable.
		Off: Select if you are using a TV antenna.
	After changing your cable settings, you will need to perform Auto Program. When
	Channel Fix is set, you will not be able to use your Cable settings.
Channel Fix		2-6:Select when you want to control all channel selection through a cable
￿		box or VCR. Select the appropriate channel (usually 3 or 4) and use the
		cable box’s or VCR’s remote control for channel selection.
		Video 1: Select from available video inputs when you have connected
		video equipment (e.g. satellite receiver) and you want your TV fixed to it.
		Off: Channel Fix is not set.
Auto Program		Press g to perform Auto Program.
￿		The TV will scan through all available channels and program receivable
		channels.

20