Audiovox PAV-1 Mode / Band Selector Mode, AUX1 Tape, Manual UP/DOWN Tuning, Automatic Seek Tuning

8 MODE / BAND SELECTOR (MODE)	bl
Each time this button is pressed, the receiver band or input mode	bm
is changed as follows:

STATION PRE-SET TUNING ( / )

MEMORY SETTING BUTTON AUTO-STORE TUNING

FM à AM à TV à AUX1* à AUX2** à CD CHANGER*** à TAPE****

To set any of the 6 pre-set memories in each of the AM and FM

bands, use the following procedure:

1. Turn the unit on and select the desired band.

The indication

FM

,

AM

,

TV

,

AUX1

,

AUX 2

,

CD

or

TAPE

2. Select the first station to be pre-set using the Manual Up/Down

will appear on the display panel according to your selection.

or Automatic Seek Tuning Control 9.

* If the AUX1 input has not been disabled during installation.

3. Press the Memory Setting button bm. The channel number

** If the AUX2 input switch on side of chassis is set to the “ON”

CH1 will flash; and the audio will be muted. Within 5 seconds

position and a compatible Navigation or Rear Observation

while the channel number is still flashing and the audio is still

system is connected.

muted, momentarily press the up

or down side of the

*** If the optional Model PAV-CD 6-disc CD changer is connected.

Pre-Set Tuning button bl to select the channel (CH1 through

**** If a cassette is loaded in the tape player.

CH6) that you wish to set. When it appears, press and hold

NOTE:The TV Receiver Mode is an option that is not available in

the button until the display stops flashing and the audio returns,

this model. Although the

TV

indication will appear on the

indicating that the station is now set into that pre-set memory

display panel when cycling

through the mode selections,

position and can be recalled at any time by pressing the

actual TV reception is not possible.

Pre-Set Tuning button to select the desired number.

9 MANUAL UP/DOWN TUNING ( /

)

4. Repeat the above procedure to enter stations in the remaining

AUTOMATIC SEEK TUNING

pre-set memories on the radio bands.

Each momentarily press of the Up Tuning (

) side of the button

Pressing and holding the Memory Setting button bm for longer

will advance the unit one frequency step higher. Similarly, each

than 2 seconds will activate the Auto-Store Tuning feature which

press of the Down Tuning ( ) side of the button will tune downward.

will automatically scan the radio band in use and enter up to 6

Pressing either side of the button for longer than 0.5 seconds

strong stations into the pre-set memories. If you have already set

and then releasing will activate the Automatic Seek Tuning

the pre-set memories to your favorite stations, activating the Auto-

function in the selected direction. The radio will seek the next		Store feature will erase those stations and enter the new strong
available station and stop at that frequency. The Seek function
		stations. This feature is most useful when traveling in a new
can be stopped by pressing the button again or activating any other
		area where you are not familiar with the local stations.
tuning function.
	-3-