Sony KV-32HV600 manual Video, Audio Out option to Variable

Welcome

SETUP

SETUP

SETUP

SETUP

Other Info

Video

Problem	Possible Remedies
No picture	❏ If your TV does not turn on, and a red light keeps flashing, your TV may
(screen not lit), no sound	need service. Call your local Sony Service Center.
	❏ Make sure the power cord is plugged in.
	❏ Press the POWER button on the front of the TV.
	❏ Press the TV/VIDEO button to cycle through the connected video sources.
	❏ Try another channel; it could be station trouble.
Dark, poor or no	❏ Adjust the Picture option in the Video Menu (see page 64).
picture (screen lit),	❏ Adjust the Brightness option in the Video Menu (see page 64).
good sound	❏ Check the antenna/cable connections.
No color	❏ Adjust the Color option in the Video Menu (see page 64).
Only snow and noise	❏ Check the antenna/cable connections.
appear on the screen	❏ Try another channel; it could be station trouble.
	❏ Press ANT to change the input mode (see page 40).
Dotted lines	❏ Adjust the antenna.
or stripes	❏ Move the TV away from noise sources such as cars, neon signs, or hair-
	dryers.
Double images or ghosts	❏ Using a highly directional outdoor antenna or a cable may solve the
	problem.
“Black box” on screen	❏ You have selected a text option in the Setup Menu and no text is available.
	(See page 74 to reset Setup selections.) To turn off this feature, set the
	Caption Vision option to Off. If you were trying to select closed captioning,
	select CC1 instead of TEXT 1-4.
16:9 Enhanced feature	❏ If the Auto setting does not automatically detect the 16:9 signal from your
	DVD player, select On to manually turn on the 16:9 Enhanced feature. For
	details, see page 75.

Audio

Problem	Possible Remedies
Good picture,	❏ Press MUTING so that the word Muting disappears from the screen (see page
no sound	40).

❏Make sure the Speaker option is set to On in the Audio Menu (see page 67). Cannot gain enough volume ❏ Increase the volume of the cable box using the cable box’s remote control.

when using a cable box	Then press TV FUNCTION and adjust the TV’s volume.
Sound seems weak or	❏ The TV’s audio might be set to Auto SAP or Mono, when it might be better set
insufficient	to Stereo. In the Audio Menu (see page 66), set the MTS setting to Stereo. If
	already set to Stereo, switch to Mono (which may reduce background noise
	during weak stereo broadcasts).
Cannot raise the volume on	❏ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
external audio speakers	order to output the sound to your audio system) use your audio receiver to
	adjust the sound (see page 66). Or, to use the TV remote control, set the
	Audio Out option to Variable.
	❏ To turn on the TV speakers, set the Speaker option to On (see page 66).

82